| Technical data |
| Sheath | LSZH (halogen-free) |
| Shielding | S-STP(S/FTP) pair foil shielded |
| Length | 7,5m |
| Colour | Red |
| MHz | 250Mhz |
| CAT | CAT6 |
| Connector type | Long |
| Cable type | Round |
| Cable outer diameter mm | 5.80 |
| AWG (single conductor size) | 27 |
| POE cable power | POE/POE+/POE++ |
The patch cable from the brand Synergy 21, manufacturer's number S216074, is a data cable of category 6 (Cat6) with a length of 7.5 metres. It is designed as S-STP (S/FTP), meaning that each individual wire pair is shielded with a foil shield, and additionally, an outer braid shields the entire cable. This shielding system ensures high resistance to interference and minimizes electromagnetic interference (EMI) as well as crosstalk, which is particularly advantageous in environments with high electromagnetic noise or in networks with high data rates. The cable is designed for frequencies up to 250 MHz, meeting the requirements of standards ISO/IEC 11801, EN50173-1 and ANSI/TIA-568-C.2, and is therefore suitable for use in modern Ethernet networks capable of transmitting up to 10 Gbit/s over short distances.
Patch cable of this type is typically used in network installations to connect switches, routers, PCs, servers or other network devices. The use of
S-STP shielding makes it particularly suitable for environments where high data integrity and low interference are required, such as in server rooms, office buildings or industrial facilities. The
LSZH jacket (Low Smoke Zero Halogen) ensures that in case of fire, only minimal smoke and no toxic halogen compounds are released, increasing safety in the application environment.
The connectors at both ends are RJ45 connectors with strain relief, ensuring a secure and stable connection. The connectors are coated with 80A PVC, providing mechanical stability and good protection against wear. The contact pins are gold-plated (3 µm), ensuring high conductivity and corrosion resistance. The individual conductors have a gauge of 27 AWG, providing sufficient conductivity for the intended data rates. The cable has an outer diameter of 5.8 mm and is round, facilitating easy installation and mounting.
Technology explained clearly: The cable shielding consists of two layers: each wire pair is individually shielded with a metallic foil, reducing crosstalk between the pairs. Additionally, the entire cable is surrounded by a metallic braid that blocks external electromagnetic interference. This double shielding is particularly important when the cable is routed near motors, transformers or other interfering devices. The
LSZH jacket is environmentally friendly and safe, as it does not release toxic gases when exposed to heat or fire.
Compatibility and accessories: The patch cable is suitable for use in networks with PoE (Power over Ethernet), PoE+ and PoE++, meaning it can transmit power over the network cable. This is particularly useful for devices such as IP cameras, access points or telephone systems that are powered via the network. Compatible accessories available in the range include cable ties made of Velcro or plastic, Velcro tape, and flexible cable organizers, which assist in proper securing and routing of the cable.
Installation and mounting: The cable can be installed in standard rack systems, on walls or in cable ducts. The minimum bending radius is 60 mm, allowing flexible routing without damaging the cable. Connections are made via RJ45 connectors, which are inserted into standard network ports (e.g. switch ports, routers, PCs). The use of cable ties or cable organizers is recommended to ensure proper routing and to avoid tension on the cable.
Operational advantages: The cable offers high data transmission rates and reliability, even in interference-sensitive environments. The shielding ensures a low error rate and a stable connection. The LSZH jacket increases safety in the application environment, especially in enclosed spaces. The cable is packaged in a PE bag with label, protecting the cable and facilitating identification.
The operating temperature of the cable ranges from -20 °C to +75 °C, allowing use in a wide range of indoor and outdoor environments. Electrical tests include 100 % inspection for open and short circuits as well as incorrect wiring. Insulation resistance testing is performed with DC 300 V and a minimum value of 10 MΩ. The contact resistance is 1 Ω per metre. The cable complies with the requirements of ROHS 3.0 and REACH directives and is therefore environmentally compatible.
Colour and marking: The cable is red, enabling easy visual identification, especially in complex network infrastructures. The colour is specified by the manufacturer as PANTONE 199C. The packaging is a PE bag with label, protecting the cable and displaying product information.
The use of this patch cable is ideal for professional network installations where high data rates, interference resistance and safety are required. The combination of S-STP shielding, LSZH jacket and PoE support makes it a robust and high-performance product for use in modern IT infrastructures.