| Technical data |
| Sheath | LSZH (halogen-free) |
| Shielding | S-STP(S/FTP) pair foil shielded |
| Length | 5m |
| Colour | Red |
| MHz | 250Mhz |
| CAT | CAT6 |
| Connector type | Long |
| Cable type | Round |
| Cable outer diameter mm | 5.80 |
| AWG (single conductor size) | 27 |
| POE cable power | POE/POE+/POE++ |
The patch cable from the brand Synergy 21, manufacturer's number S216065, is a data cable of category 6 (Cat6) with a length of 5 metres and a red-coloured outer jacket. It is designed for use in network infrastructures, particularly in environments where high data transfer rates and reliable signal transmission are required. The cable features S-STP (S/FTP) shielding, meaning that each pair of conductors is individually shielded with foil and additionally an outer braid surrounds the entire cable. This construction provides high protection against electromagnetic interference (EMI) and crosstalk, which is essential for stable and high-quality data transmission.
Applications
This patch cable is suitable for use in structured cabling systems, for example in IT infrastructure, server rooms, or for connecting switches, routers, PCs, or network devices. The cable type is designed for indoor use, with a specified operating temperature range of -20 °C to +75 °C, enabling use in various environments. The LSZH insulation (Low Smoke Zero Halogen) ensures that in case of fire, only minimal smoke and no toxic halogens are released, increasing safety in enclosed spaces.
Functions and Features in Detail
The connectors at both ends are RJ45 connectors with strain relief protection, ensuring a secure and stable connection. The connector contacts are nickel-plated, which improves contact quality and extends service life. The individual conductors consist of 27 AWG (American Wire Gauge) copper wire, providing sufficient conductivity for data transmission up to 250 MHz. The cable construction complies with the standards ISO/IEC 11801, EN50173-1, and ANSI/TIA-568-C.2, defined for category 6. The pin assignment follows the 568B standard, ensuring compatibility with most network devices.
Technology Explained Simply
This double shielding reduces interference and enables high data transfer rates. The frequency bandwidth of 250 MHz supports data rates up to 10 Gbit/s over short distances, and the cable construction is suitable for use in Gigabit networks and also in 10-Gigabit networks. The LSZH insulation is environmentally friendly and safe, as it does not release toxic gases when exposed to heat or fire.
Compatibility and Accessories
The cable is compatible with all devices that support RJ45 connectors and meet Cat6 standards. It can be used in combination with other products from the manufacturer Synergy 21, for example with cable ties, Velcro tape, or cable organizers, to ensure proper cabling and better cable organization. The use of cable organizers or spiral organizers can help route the cable neatly and reduce stress on the connectors.
Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The connectors feature strain relief protection, ensuring a secure connection. The minimum bending radius is 60 mm, which must be considered during installation to avoid damaging the cable. The cable is packaged in a PE bag with a Synergy 21 label, enabling easy identification and storage.
Operational Advantages
The patch cable provides reliable and stable data transmission with high bandwidth. The S-STP shielding ensures low interference, which is particularly beneficial in environments with high electromagnetic interference. The LSZH insulation increases safety in case of fire. Support for PoE (Power over Ethernet), PoE+, and PoE++ enables power supply to end devices such as IP cameras, access points, or telephones via the network cable, eliminating the need for additional power sources. The operating temperature range of -20 °C to +75 °C makes the cable suitable for a wide range of operating conditions.