| Technical data |
| 19" rack accessories | Cable tie |
Cable ties made of nylon for use in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems, manufactured by Synergy 21, are designed for the proper securing and routing of cables and lines in IT and networking environments. The cable ties are transparent and allow visual inspection of cable routing without obscuring the cables themselves. With a length of approximately 100 mm and a width of 2.5 mm, they are suitable for medium to large cable bundles, particularly in server rooms, network, and data processing environments. The cable ties feature an integrated marking surface of 25 mm × 8 mm at the front tip, which can be labeled with a water-resistant pen. This facilitates identification and assignment of cables, especially in complex installations with numerous connections.
Cable ties are made of nylon, a material known for its high strength, resistance to mechanical stress and chemical influences, as well as long-term stability. The transparent design allows clear visibility of the cables, which is advantageous during maintenance and inspection work. The cable ties are designed for an operating temperature range of -35 °C to 85 °C, making them suitable for indoor use and environments with moderate temperature fluctuations. The storage temperature range is -40 °C to 90 °C, ensuring safe storage under normal conditions.
Marking surface is directly integrated at the front tip of the cable tie and measures 25 mm × 8 mm. This surface can be labeled with a water-resistant pen to clearly identify cable bundles. The labeling remains intact even under slight moisture or minor mechanical stress, increasing the reliability of identification. The positioning of the marking surface at the tip facilitates reading and assignment, especially when multiple cable ties are installed side by side.
Nylon as a material offers high tensile strength and resistance to UV radiation, moisture, and everyday mechanical stress. The cable ties are therefore suitable for use in IT infrastructures, server rooms, and other technical installations where durable and secure cable fastening is required. The material composition complies with the requirements of RoHS Directive 2011/65/EU and its amending directive (EU) 2015/863, as well as REACH Regulation 1907/2006/EC, enabling use within the EU and other regions with corresponding environmental and safety regulations.
Compatibility and accessories refers to use in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems, particularly in conjunction with LWL and patch cables. The cable ties are not specific to any particular cable type but are universally applicable for all cables requiring fastening. The transparent design and integrated marking surface make them especially suitable for installations where clear overview and cable identification are necessary. The cable ties are supplied in a pack of 100 pieces, packaged in a PE bag with label.
Installation and mounting is performed by simply wrapping the cable bundle and securing the cable tie using the integrated tongue. The cable ties are not self-cutting and must be cut off after securing with an appropriate tool (e.g., scissors or cable tie cutter). The fastening is done without additional tools, and the marking surface remains visible after securing. The cable ties are designed for single use and are not reusable.
Operational advantages include easy handling, clear labeling capability, and durable material quality. The transparent design allows for quick visual inspection of cables, while the marking surface enables permanent labeling. The cable ties are suitable for use in enclosed enclosures and environments with moderate ambient conditions, with temperature resistance ensuring reliable operation over a wide range. The packaging of 100 pieces offers an economical solution for larger projects or maintenance work.
The cable ties are supplied in a PE bag with label, with the pack containing 100 pieces. The packaging serves exclusively for storage and transport safety of the cable ties.
Technical specifications include a length of 100 mm ± 3 mm, a width of 2.5 mm ± 0.3 mm, a marking surface of 25 mm × 8 mm, an operating temperature range of -35 °C to 85 °C, and a storage temperature range of -40 °C to 90 °C. The material is nylon, transparent, and complies with RoHS 2011/65/EU, (EU) 2015/863, and REACH 1907/2006/EC. The cable ties are designed for use in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems, particularly in conjunction with LWL and patch cables.
The cable ties are supplied in a pack of 100 pieces, packaged in a PE bag with label. The packaging serves exclusively for storage and transport safety of the cable ties.
Applications include securing cables in server rooms, network, and data processing environments, particularly in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems. The cable ties are suitable for LWL and patch cables, but also for other cable types requiring proper routing and fastening. The transparent design and integrated marking surface support clear overview and cable identification, which is beneficial during maintenance and inspection work.
Functions and equipment in detail include the integrated marking surface, which can be labeled with a water-resistant pen, and the transparent nylon design. The cable ties are designed for single use and must be cut off after securing. The packaging contains 100 pieces, supplied in a PE bag with label.
Technology explained simply shows that the cable ties are made of robust, transparent nylon, known for its strength and durability. The marking surface allows for permanent labeling that remains intact even under slight moisture. The cable ties are designed for a temperature range of -35 °C to 85 °C, making them suitable for indoor use. The packaging of 100 pieces offers an economical solution for larger projects.
Compatibility and accessories refers to use in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems, particularly in conjunction with LWL and patch cables. The cable ties are universally applicable and not specific to any particular cable type. The transparent design and integrated marking surface make them especially suitable for installations where clear overview and cable identification are necessary.
Installation and mounting is performed by simply wrapping the cable bundle and securing the cable tie using the integrated tongue. The cable ties are not self-cutting and must be cut off after securing with an appropriate tool (e.g., scissors or cable tie cutter). The fastening is done without additional tools, and the marking surface remains visible after securing. The cable ties are designed for single use and are not reusable.
Operational advantages include easy handling, clear labeling capability, and durable material quality. The transparent design allows for quick visual inspection of cables, while the marking surface enables permanent labeling. The cable ties are suitable for use in enclosed enclosures and environments with moderate ambient conditions, with temperature resistance ensuring reliable operation over a wide range. The packaging of 100 pieces offers an economical solution for larger projects or maintenance work.
The cable ties are supplied in a PE bag with label, with the pack containing 100 pieces. The packaging serves exclusively for storage and transport safety of the cable ties.
Applications include securing cables in server rooms, network, and data processing environments, particularly in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems. The cable ties are suitable for LWL and patch cables, but also for other cable types requiring proper routing and fastening. The transparent design and integrated marking surface support clear overview and cable identification, which is beneficial during maintenance and inspection work.
Functions and equipment in detail include the integrated marking surface, which can be labeled with a water-resistant pen, and the transparent nylon design. The cable ties are designed for single use and must be cut off after securing. The packaging contains 100 pieces, supplied in a PE bag with label.
Technology explained simply shows that the cable ties are made of robust, transparent nylon, known for its strength and durability. The marking surface allows for permanent labeling that remains intact even under slight moisture. The cable ties are designed for a temperature range of -35 °C to 85 °C, making them suitable for indoor use. The packaging of 100 pieces offers an economical solution for larger projects.
Compatibility and accessories refers to use in 48,3 cm ( 19 inch )- and 25,4 cm ( 10 inch )-enclosure systems, particularly in conjunction with LWL and patch cables. The cable ties are universally applicable and not specific to any particular cable type. The transparent design and integrated marking surface make them especially suitable for installations where clear overview and cable identification are necessary.
Installation and mounting is performed by simply wrapping the cable bundle and securing the cable tie using the integrated tongue. The cable ties are not self-cutting and must be cut off after securing with an appropriate tool (e.g., scissors or cable tie cutter). The fastening is done without additional tools, and the marking surface remains visible after securing. The cable ties are designed for single use and are not reusable.
Operational advantages include easy handling, clear labeling capability, and durable material quality. The transparent design allows for quick visual inspection of cables, while the marking surface enables permanent labeling. The cable ties are suitable for use in enclosed enclosures and environments with moderate ambient conditions, with temperature resistance ensuring reliable operation over a wide range. The packaging of 100 pieces offers an economical solution for larger projects or maintenance work.
The cable ties are supplied in a PE bag with label, with the pack containing 100 pieces. The packaging serves exclusively for storage and transport safety of the cable ties.