| Technical data |
| Fibre type | OS2_9/125u |
| Connector type | standard |
| Side A | LSH(E2000APC_Schrägschliff) |
| Product type | Patch cable |
| Side B | LC/UPC (flat polish) |
| Number of fibres/ports | 2 (Duplex) |
| Length in metres | 5 m |
| Conductor diameter in mm | 3,0 mm |
This product is an LWL-2-fiber patch cable from the brand Synergy 21, type S215516, designed for use in singlemode networks. It connects two optical end devices over a distance of 5 meters and is designed as a duplex cable, meaning two fibers are integrated into one cable to enable bidirectional data transmission. The fiber type corresponds to the OS2 standard with a core diameter of 9 µm and a cladding diameter of 125 µm, suitable for high-speed applications over long distances. The cable color is yellow, which is standard in industry for singlemode fibers.
Applications
This patch cable is intended for indoor use and is suitable for networks requiring high bandwidth and long transmission distances, such as data centers, corporate networks, or for connecting switches, routers, and servers. The use of singlemode fibers enables data transmission rates up to 10 Gbit/s over distances of several kilometers, with the exact range depending on the technology used and optical properties.
Functions and Equipment in Detail
At side A of the cable, an LSH(E2000APC) connector with angled polish (APC) is installed, providing high return loss attenuation. This connector type is particularly suitable for applications requiring minimal signal loss and high signal quality. At side B, an LC/UPC connector with flat polish (UPC) is installed, representing a standard connection in modern networks. The combination of APC and UPC allows flexible connection to different devices, with return loss attenuation of at least 60 dB for APC and at least 50 dB for UPC. Insertion losses are maximum 0.30 dB per channel, measured at a wavelength of 1310 nm, ensuring stable and reliable signal transmission.
Technology Explained Simply
The OS2 fiber type is specifically developed for singlemode applications and offers low attenuation, enabling signal transmission over long distances. The designation G657.A2 refers to the fiber's bend resistance, with a minimum bend radius of 7.5 mm, allowing flexible installation in confined spaces or cable trays. The cable is halogen-free (LSZH) and thus suitable for indoor use, as it does not release toxic gases in case of fire. The conductor diameter is 3.0 mm, providing sufficient mechanical stability and protection for the fiber.
Compatibility and Accessories
The cable is compatible with devices supporting LSH(E2000APC) and LC/UPC connectors. Suitable accessories include additional LWL patch cables in various lengths (e.g. 2 m, 3 m, 10 m, 15 m, 20 m, 25 m), LWL patch panels for 24xLC duplex sockets, LWL couplers, and measurement devices such as LWL fiber checkers and fiber optic attenuation test kits. These components enable a structured and professional network installation.
Installation and Mounting
Installation is performed by simply plugging the connectors into the corresponding sockets of the devices. The connectors are equipped with protective caps to shield the optical end faces from contamination. Minimum bend radii are 10 times the cable diameter statically and 20 times dynamically, requiring careful securing and routing of the cable to avoid damage. The operating temperature range is from -40 °C to +85 °C, and the storage temperature range is from -20 °C to +70 °C.
Operational Advantages
The patch cable provides reliable and stable data transmission with low signal loss and high return loss attenuation. The use of halogen-free material increases safety in indoor environments. The combination of APC and UPC connectors allows flexible connection to various network devices. The yellow cable color facilitates identification in cable management. The product is packaged in a blister pack from the brand Synergy 21, ensuring protection of the cable during transport and storage.