Synergy 21 S215491V2, EAN: 4038816183866

Synergy 21 S215491V2 Fiber Checker Laser

Synergy 21 S215491V2 Fiber Checker Laser

Lieske Part No. 1782268
Mfg Part No S215491V2
EAN-Code 4038816183866
Manufacturer Synergy 21
Here only 36,00 EUR
42,84 EUR incl. VAT

Further information for Synergy 21 S215491V2 Fiber Checker Laser

Technical data
Product typeMeasuring instruments
The fibre optic test device from Synergy 21, type S215491V2, is a compact measuring instrument for visual fault location in optical fibre cables (LWL). It serves as an aid for testing and maintenance of single-mode and multi-mode LWL systems on-site, in industrial environments, and in laboratories. The device generates visible laser light in the wavelength range of 635–650 nm, which is transmitted through the fibre to make breaks, contamination, or other faults visible. The maximum range is approximately 10 km, with the laser power rated at 10 mW. The device is designed as a Visual Fault Locator (VFL) and thus enables rapid identification of faults in LWL connections.

Applications

The device is suitable for use in telecommunications, for the installation and maintenance of LWL networks, and in industrial automation. It is particularly used for fault detection in cables that are not directly visible, such as those installed in conduits or cable ducts. The device can be used both indoors and outdoors, with operating temperatures ranging from -10 °C to +50 °C and storage temperatures from -20 °C to +60 °C defining the operating conditions. Relative humidity is up to 90 % RH during operation and storage.

Functions and Equipment in Detail

The device features an integrated switch for selecting between continuous light emission (CW) and pulsed light emission (2 Hz). The pulsed emission facilitates distinguishing the test signal from other light sources in the network. The device is equipped with a 2.5 mm ferrule connector, suitable for standard connectors such as DIN, E2000, FC, SC, and ST. An integrated adapter allows connection to 1.25 mm ferrules, as used with LC and MU connectors. However, this adapter is not screwed onto the base device but is inserted and does not lock mechanically — the connection is therefore mechanically loose.

Technology Explained Simply

The device uses a red laser operating in the visible spectrum to make faults in LWL cables visible. At a break or contamination point in the cable, the light escapes and appears as a red dot or beam, enabling precise fault location. The 10 mW power output is sufficient to cover distances up to 10 km, although the visibility of the light depends on the environment and cable quality.

Compatibility and Accessories

The device is designed for LWL cables with 2.5 mm and 1.25 mm ferrules. Compatibility includes common connector types such as SC, ST, FC, DIN, E2000, as well as LC and MU via the integrated adapter. Included accessories are a dust cap for the 2.5 mm connector, a nylon case for storage, and an instruction manual. Additionally, a spare part in the form of a ceramic sleeve for the laser is provided, which can be screwed below the 2.5 mm output. This sleeve serves for maintenance and replacement of the laser output.

Mounting and Installation

Installation is done by simply inserting the device into the LWL connector. Connection to the cable is made via the 2.5 mm ferrule connector. The adapter for 1.25 mm ferrules is inserted directly into the 2.5 mm connector, with no mechanical locking mechanism. Operation is controlled via a switch on the device, which can toggle between CW and pulse mode.

Advantages in Operation

The device provides fast and visual fault location without requiring additional measuring instruments. The combination of compact design and universal compatibility with common connector types makes it a practical tool for technicians. The integrated ceramic sleeve as a spare part increases the device’s service life. The operating temperature range and robust construction with an aluminium housing make it suitable for industrial applications. The use of visible laser light enables simple and rapid diagnosis without the need for special optical measuring equipment.

Note: Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1782268
qrcode für Synergy 21 S215491V2 Fiber Checker Laser