Synergy 21 S215107, EAN: 4038816223104

Synergy 21 S215107 Cat5e Patch Cable 0.5m Gray

Cables > Data lines > Cat5 Patch Cable

Synergy 21 S215107 Cat5e Patch Cable 0.5m Gray

Lieske Part No. 300135
Mfg Part No S215107
EAN-Code 4038816223104
Manufacturer Synergy 21
Here only 0,68 EUR
0,81 EUR incl. VAT

Further information for Synergy 21 S215107 Cat5e Patch Cable 0.5m Gray

Technical data
CATCAT5e
ShieldingS-FTP(SF/UTP) double shielded
Length0,5m
SheathPVC
ColourGrey
MHz100Mhz
Connector typeLong
Cable typeRound
AWG (single conductor size)26
Cable outer diameter mm5.70
The patch cable from Synergy 21, type S215107, is a data cable of category Cat5e with a bandwidth of 100 MHz, designed for use in networks according to the standards ISO/IEC 11801 and EN 50173. It features double shielding (S-FTP, i.e., shielding by foil and braid) and is therefore particularly suitable for environments with high electromagnetic interference, where high signal integrity is required. The cable is available in a length of 0.5 metres and has a PVC jacket in grey colour, providing good mechanical stability and resistance to external influences. The cable construction includes four pairs with a single conductor size of 26 AWG, where the conductors are shielded with an aluminium foil and a metallic braid (Al-MG) to ensure effective shielding against electromagnetic interference (EMI).

Applications
This patch cable is suitable for use in local area networks (LAN), particularly in environments where high data integrity and low interference are required. Typical applications include connecting network devices such as switches, routers, PCs, or servers within data centres, office buildings, or industrial environments. The shielding of the cable makes it especially suitable for areas with electrical equipment that may cause interference, such as near motors, transformers, or other electrical installations.

Functions and Features in Detail
At both ends of the cable, RJ45 connectors with strain relief protection are installed, ensuring a secure and stable connection. The connectors are fitted with a 80A PVC boot, providing mechanical stability and high protection against abrasion. The connector contacts are coated with a 3 µm gold plating, ensuring reliable electrical conductivity and corrosion resistance. The pin assignment follows the standard 568B, enabling compatible connection with most network devices.

Technology Explained Simply
The S-FTP shielding (Screened-Foil Twisted Pair) means that each individual pair of conductors is shielded with an aluminium foil, and additionally, the entire cable is surrounded by a metallic braid. This double shielding reduces electromagnetic interference and crosstalk between the conductor pairs, improving signal quality and data transfer rate. The cable is designed for an operating temperature range of -20 °C to +60 °C, allowing use in a wide range of indoor and outdoor environments. The minimum bending radius is 60 mm, enabling flexible handling and installation even in confined spaces.

Compatibility and Accessories
The patch cable is compatible with all devices that support RJ45 connectors and comply with the Cat5e standard. It can be used in combination with other products from Synergy 21, such as cable ties, Velcro tape, or cable organizers, to ensure proper cabling and cable routing. The use of cable ties or Velcro tape allows for structured and neat cable fixation, especially in rack systems or on walls.

Installation and Mounting
Installation is carried out by simply inserting the RJ45 connectors into the corresponding sockets of the network devices. The strain relief feature of the connectors ensures that the connection cannot be accidentally disconnected. During installation, care must be taken not to exceed the minimum bending radius of 60 mm to maintain the mechanical integrity of the cable. The cable is supplied in a blister pack from Synergy 21, which ensures protection during transport and storage.

Operational Advantages
The double shielding ensures high signal quality and minimizes interference, resulting in stable and reliable data transmission. The use of 26 AWG conductors ensures sufficient conductivity for data transmission up to 100 MHz. The robust construction with PVC jacket and gold-plated contacts increases the cable's lifespan and ensures long-term operation under normal conditions. Compliance with the standards ISO/IEC 11801 and EN 50173 ensures that the cable is suitable for use in professional networks and meets the required quality standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/300135
qrcode für Synergy 21 S215107 Cat5e Patch Cable 0.5m Gray