| Technical data |
| Beam angle | 120 degrees |
| Constant current or constant voltage | CV |
| Protection class | IP68 |
| Volt | 12 Volt |
| Light colour name | RGB |
| Ampere (CC) | 0,60 A |
The LED in-ground spotlight ARGOS RGB by Synergy 21 is a flexible, water- and dust-tight ground lighting strip for use in outdoor areas as well as in damp indoor spaces. With a protection class of
IP68, it is protected against dust and continuous water exposure, making it suitable for use in gardens, terraces, entrance areas, or other outdoor installations. The strip operates at a voltage of
12 Volt and uses a constant voltage system (CV), ensuring stable light output. The maximum current draw is
0.60 Ampere, corresponding to a power consumption of
7.2 Watt. The light color is
RGB, allowing for various colors and color changes, with precise color control achieved via a separate RGB controller accessory.
Applications
The in-ground spotlight is designed for outdoor use, where high resistance to weather influences is required. It is suitable, for example, for illuminating paths, stairs, terraces, or as accent lighting in gardens. The temperature resistance up to
-25°C allows use even in colder regions. The dimensions of 1000 mm length, 13 mm width, and 5.5 mm height make it a slim, discreet lighting element that can be integrated into floor slabs or tiles.
Functions and Equipment in Detail
The strip consists of 30 LEDs in 5050 SMD format, ensuring even light distribution. The
beam angle of 120 degrees provides broad, soft light spread, contributing to pleasant illumination. The white PCB (Printed Circuit Board) ensures good heat dissipation, positively influencing the LED lifespan. The strip is cuttable – at the marked points, all three LEDs can be cut simultaneously, but cutting must only be done with the power switched off. Connections are made using
ARGOS connectors, ensuring a secure and waterproof connection.
Technology Explained Simply
The designation
IP68 means the strip is completely dust-tight and can be operated underwater, as long as the maximum depth is not exceeded. Power supply is via
12 Volt DC, which represents a low voltage and is therefore safer to handle. The energy efficiency class
A with a consumption of 7.2 kWh/1000h indicates that the strip operates energy-efficiently. The maximum operating temperature of
40°C must not be exceeded to ensure longevity – this requires sufficient cooling and ventilation during installation.
Compatibility and Accessories
Additional components are required to use the strip. Compatible accessories include, among others,
RGB controllers IP67,
distribution cables IP67,
distribution boxes IP67,
dusk sensors IP67,
T-pieces IP67,
extension cables in various lengths (1m, 2m, 3m), and
power supplies in various ratings (3W, 8W, 30W). These components enable flexible control, extension, and distribution of lighting. The use of
end caps IP67 protects the ends of the strip and ensures a clean visual finish.
Installation and Mounting
Mounting is done using the included 3M adhesive tape, which serves as a mounting aid. Alternatively, clips, permanent elastic mounting adhesive, or cable ties can be used. Installation must be carried out by qualified professionals, and power must be switched off before mounting. Cutting the strip is only possible with power off and at designated marking points. The use of ARGOS connectors ensures a waterproof and secure connection.
Operational Advantages
The LED in-ground spotlight ARGOS RGB offers high robustness and reliability due to its IP68 protection class. The RGB functionality enables versatile lighting designs that can be adapted to different requirements. The combination of low power consumption, high light output, and long lifespan makes it an economical and sustainable lighting solution. Easy installation and the wide range of compatible accessories increase flexibility in planning and implementing lighting concepts.