Further information for Synergy 21 S21-LED-TOM00080 LED Retrofit GU10 4x1W kw
Technical data
CRI
80 CRI
Light colour name
Cool white
Volt
230 Volt
Light colour in Kelvin
6500 K
Beam angle
60 degrees
Socket
GU10
Lumens
440 LM
Dimmable
The Synergy 21 LED Retrofit lamp with manufacturer number S21-LED-TOM00080 is a replacement for conventional halogen reflector lamps in GU10 format. It is suitable for use in existing luminaires designed for GU10 sockets and provides an energy-efficient lighting solution. The device features an ALU housing that ensures efficient heat dissipation and is designed for an operating voltage of 85 to 265 volts, enabling universal use in various power networks.
LED Retrofit Lamp
The product is designed as an LED retrofit lamp, meaning it can be directly installed into existing GU10 lamp sockets without requiring a complete new installation. The lamp consists of four individual 1-watt LEDs, collectively producing a luminous output of 440 lumens. This light output is equivalent to that of a 50-watt halogen lamp, while reducing energy consumption to only 4 watts. The energy efficiency class A++ highlights the high efficiency of the product, with a specific energy consumption of 4 kWh per 1000 hours of operation.
Light Colour and Beam Angle
The light colour is defined as cool white, with a colour temperature of 6500 Kelvin ±250 Kelvin. This colour temperature is particularly suitable for work areas, retail spaces, or rooms where bright, clear lighting is desired. The beam angle is 60 degrees, providing a focused yet sufficiently wide light distribution. The luminous output is thus specifically designed for point lighting, as commonly used in ceiling spotlights or wall luminaires.
Technical Features and Operating Conditions
The device is equipped with a GU10 socket, ensuring a secure and standardised connection to the luminaire. The operating temperature is limited to the range of 0 to 50 degrees Celsius; deviations from this range may affect the lifespan of the LEDs. The CRI value of 80 indicates that the colour rendering of the light is sufficient to realistically represent colours, which is adequate for many applications. The lamp is non-dimmable, meaning its brightness cannot be adjusted using a dimmer.
Compatibility and Accessories
The lamp is compatible with all standard GU10 sockets. It can be combined with various accessories available in the range, such as LED adapters, ceiling mounting kits, or fixtures for ceiling mounting. These accessories enable flexible installation, for example in suspended ceilings or track lighting systems. The mentioned accessories are specifically designed for GU10 LEDs and support various mounting options, including swivelling or suspended fixtures.
Operation and Maintenance
The lamp is intended for indoor use. The operating temperature range of 0 to 50 degrees Celsius requires installation in well-ventilated areas to prevent overheating. Heat dissipation via the ALU housing supports thermal stability. Installation should be carried out by qualified personnel, ensuring the power supply is switched off before mounting to avoid electrical hazards. The lifespan of the LEDs is ensured by adhering to the specified operating conditions.
Operational Advantages
Using this LED retrofit lamp results in significant energy savings, as the power consumption is only 4 watts while the luminous output is comparable to higher-consumption halogen lamps. The long lifespan and low maintenance frequency reduce operational effort. Installation in existing luminaires allows for quick and cost-efficient modernisation without structural changes to the lighting system.