| Technical data |
| Dimmable | Yes, DALI |
The Synergy 21 DALI Controller of the EOS 07 series, type S21-LED-SR000142, is a
DALI control device for
RGB-WW lighting systems, particularly for LED strips, RGB-WW spotlights or similar applications. The device functions as a
DT8 controller and enables dimmable control of five channels (R, G, B, W, Amber) via a single DALI address field. It is designed for use in professional lighting installations requiring precise colour and brightness control.
Applications
The controller is suitable for applications in the field of
intelligent lighting, where flexible colour temperature and colour control is required. Typical use cases include indoor lighting in offices, hotels, apartments or showrooms, where the lighting mood should be dynamically adjusted. Control is performed via a
DALI network, compatible with universal DALI master controllers supporting DT8 commands. Colour control follows the DALI specification for device type 8, colour type RGBWA, enabling precise and standardised colour regulation.
Functions and Equipment in Detail
The device features five
constant voltage outputs (constant voltage) with a voltage range of 12 to 24 VDC. Each channel can deliver up to 5 A, enabling a total power output of 5 channels × 5 A = 25 A. The outputs are designed for
PWM dimming, allowing fine brightness control of connected LED modules. Control is performed via the
DALI protocol, enabling bidirectional communication between the controller and the master system. The DALI address can be manually assigned and displayed on a digital display on the device, simplifying configuration on-site.
Technology Explained Simply
The controller operates as a
DT8 device according to the standard
IEC 62386-209:2011, specifically defined for colour control units. The designation DT8 stands for Device Type 8, meaning a device capable of controlling coloured light (RGBWA). The colour channels Red (R), Green (G), Blue (B), White (W) and Amber (A) are controlled via a single DALI address field, simplifying network architecture. Control is performed via
PWM signals, which regulate LED brightness by modulating the on-time. Configuration is done using a
DALI software tool and a
DALI-USB interface, enabling precise parameter adjustment during operation. Additionally,
overcurrent and overtemperature protection are integrated to protect the device and connected components from damage.
Compatibility and Accessories
The controller is compatible with universal DALI master controllers supporting DT8 commands. It can be combined in a DALI network with other devices from the EOS 07 series, such as
DALI wall switches (e.g. DT8 CCT 4 group, DT8 RGB-White 4 groups) or
DALI bus power supplies. Use with other DT8 controllers enables control of complex lighting scenarios with multiple colour and brightness zones. Control via the DALI network allows centralised lighting control.
Mounting and Installation
Installation must be performed by qualified personnel. Before mounting, power must be switched off to avoid electrical hazards. Wiring is done at the designated terminals for the 12–24 VDC supply voltage and the five outputs for LED loads. The DALI interface is connected to the DALI network. Configuration of the DALI address and other parameters is done via an external software tool over USB, enabling precise adjustment during operation.
Advantages in Operation
Use of the controller enables flexible and precise control of RGB-WW lighting systems. Integration into a DALI network provides central control, which integrates well into existing building management systems. Integrated protection functions increase safety and device lifespan. Configurability via software tools allows individual adaptation to specific requirements. Compatibility with other EOS 07 series products simplifies expansion and adaptation of lighting systems.