| General |
| Number of channels | 4 - |
| Input voltage | 12-36 VDC |
| Output current per channel | 5 A |
| Maximum output power per channel | 60-180 W |
| Degree of protection | IP20 - |
| Compatibility | EOS 02, EOS 03, EOS 04, EOS 06, EOS 07, EOS 08, EOS 09 - |
| Signal transmission | PWM - |
The product from Synergy 21, manufacturer number S21-LED-SR000089, is a 4-channel amplifier/repeater for LED lighting systems, specifically designed for extending power supply and signal transmission in RGB-W LED systems. It serves as an intermediate amplifier to ensure the performance of LED strips over longer distances or with a higher number of connected modules. The repeater is compatible with various models of the LED series EOS, including EOS 02, EOS 03, EOS 04, EOS 06, EOS 07, EOS 08, and EOS 09, and enables the extension of control and power supply signals in a chain.
Applications
The amplifier is used in professional LED lighting systems where a high number of LED strips or longer arrangements are operated. It is particularly suitable for applications where signals from remote controls or control devices must be transmitted over long distances without impairing signal quality or power supply. Indoor use is intended, as the protection rating IP20 does not protect against direct weather exposure. For outdoor applications, the repeater must be mounted in a waterproof housing.
Functions and Equipment in Detail
The repeater features four outputs, each with a maximum current of 5 amperes, corresponding to a total power of up to 180 watts per channel. The input voltage ranges from 12 to 36 volts DC, making it suitable for a variety of power supplies. It receives PWM signals for brightness control and can relay these to the connected LED strips. Configuration is done via input connections for control (W, B, G, R) and power supply (V+, V-), with the outputs transmitting the same signals and voltages. The maximum power consumption per channel is 60 to 180 watts, depending on the number of connected LED modules.
Technology Explained Simply
The repeater operates as a constant voltage amplifier and transmits both power supply and control data (PWM) to the subsequent LED modules. It can be connected in series, thereby extending total power and controllability across multiple sections. Theoretically, an unlimited number of repeaters can be connected in series, increasing flexibility in planning large LED installations. Connections are made via standardized cable connectors, and cables must be securely fastened in the connector to avoid short circuits. The operating voltage must match the voltage of the LED strips to ensure safe and efficient operation.
Compatibility and Accessories
The repeater is specifically developed for the LED series EOS and fits models EOS 02, EOS 03, EOS 04, EOS 06, EOS 07, EOS 08, and EOS 09. It can be combined with various LED strips, including RGB LED strips with IP68 protection, such as the LED Flex Strip 5050 30 RGB DC24V 36W IP68 or the LED Prometheus IP68 RGB-White V3a. As accessories, flat ribbon cables in lengths of 25 and 50 meters are available, enabling connections between modules. Power supply options include the MEAN WELL power supply 24V 60W IP67 or the power supply 12V 96W. Mounting is done on a DIN rail, for which a DIN rail mounting rail of 100 cm length is also offered.
Mounting and Installation
Mounting is done on a DIN rail, and the unit must be installed in a well-ventilated area to prevent overheating. Installation and maintenance should be carried out by a qualified person. Cable connections must be checked before switching on to avoid short circuits. The power supply must be switched off before connecting cables. For outdoor applications, mounting in a waterproof housing is required, as the repeater itself is not weather-resistant.
Advantages in Operation
Using the repeater enables stable and reliable signal transmission over long distances, significantly increasing the number of controllable LED modules. The ability to connect multiple repeaters in series offers flexibility in planning complex lighting systems. Compatibility with various EOS models and LED strips simplifies integration into existing systems. The use of PWM signals ensures precise brightness control, and constant voltage supply guarantees uniform brightness of the LED modules. The warranty covers five years, with the manufacturing year indicated on the device (e.g., 1125 for year 2011, week 25).