| General |
| Degree of protection | IP20 |
| Operating voltage | 100~240 V |
| Input current | 210~460 mA |
| Input power | 50 W |
| Frequency | 50-60 Hz |
| Output current | 200-1500 mA |
| Output voltage | 33-60 V |
| Operation temperature | -20~50 °C |
| Housing temperature | 75 °C |
The Synergy 21 LED Series EOS 05 1-channel single color Controller+Power Supply is an integrated device that serves both as a dimmer controller and as a power supply for LED lighting systems. It is specifically designed for use with LED strips and other monochromatic LED modules that require constant current (Constant Current, CC). The device allows adjustment of the output current in multiple steps to control the brightness of connected LED modules. It is compatible with switches and remote controls from the EOS 05 series, enabling flexible control via wall dimmers, push buttons, or handheld remotes.
Applications
This device is intended for indoor use where controlled and dimmable LED lighting is required. It is suitable for residential and office spaces, commercial premises, exhibitions, or any other areas where variable lighting ambiance is desired. The operating temperature range of -20°C to +50°C makes it suitable for a wide range of indoor applications, provided the environment is not damp or wet. The protection rating IP20 excludes outdoor use or use in damp environments, as there is no protection against water or dust.
Functions and Features in Detail
The controller offers a variable output current from 200 mA to 1500 mA, with the voltage increasing accordingly with the current. The output voltage ranges from 33 V at 1500 mA to 60 V at current levels from 200 mA. This adjustability allows adaptation to different LED modules, which may have varying current and voltage requirements depending on their power and number of LEDs. Adjustment is made via an integrated regulator built into the device. The input power supply is from the public mains network with a voltage of 100 to 240 V and a frequency of 50 to 60 Hz. The maximum input power is 50 W.
Technology Explained Simply
The device combines two functions in one housing: it serves as a power supply (power supply) and as a dimmer. The power supply converts mains voltage into a direct voltage suitable for LED modules. The dimming function is enabled by the variable adjustment of the output current. The current is set in multiple discrete steps, thereby controlling the brightness of the connected LED modules. The output power is limited to 50 W, which is the maximum power the device can deliver. The operating temperature of the device is -20°C to +50°C, with the ambient temperature (Ta) needing to be within this range. The maximum housing temperature (Tc) is 75°C, which represents the temperature limit of the device itself.
Compatibility and Accessories
The controller is compatible with various control devices from the EOS 05 series, including wall dimmers (mono, Dreh-Dim Mono, Dreh-Dim Mono D), wall push buttons RGB-W, and remote controls (mono 2, mono 3, RGB-W 1, RGB-W 2). These devices enable wireless or wired control of brightness. Additionally, a power cable with CEE7 plug and open end (1.8 m, black) is available for connection to the mains supply. The use of these accessories requires no additional adapters or converters, as they are directly compatible with the controller.
Installation and Mounting
Installation must be carried out by qualified personnel. Before mounting, the power supply must be switched off to avoid electrical hazards. The device is intended for use in dry indoor environments and must be mounted in a well-ventilated location to prevent overheating. Mounting is typically done on a wall or in an enclosure, ensuring sufficient space for ventilation. Wiring is done via the designated terminal clamps, with polarity (positive/negative) to be observed. Connection to the LED strip is made via the output terminals of the controller.
Operational Advantages
The combination of power supply and dimmer in a single device reduces the number of required components and simplifies installation. The variable current output allows adaptation to different LED modules, increasing flexibility. Compatibility with various control devices from the EOS 05 series offers a wide range of control options, from simple wall dimmers to complex remote controls. The maximum power of 50 W is sufficient for many standard applications, and the operating temperature range of -20°C to +50°C makes the device suitable for a wide range of indoor applications.
Protection Rating and Operating Environment
The protection rating IP20 means the device is protected against contact with fingers or similar objects, but not against dust or water. It is therefore intended exclusively for dry indoor environments. The operating temperature range of -20°C to +50°C requires that the device is not operated in extremely cold or hot environments. The maximum housing temperature (Tc) of 75°C indicates the temperature limit of the device itself, which must not be exceeded to avoid damage. The ambient temperature (Ta) must remain within the specified range to ensure safe operation.
Warranty and Manufacturer
The device is manufactured by Synergy 21, a brand of ALLNET GmbH. The warranty period is 60 months, highlighting the high reliability and longevity of the device. The manufacturer's part number is S21-LED-SR000075. Warranty conditions apply under normal use and correct installation. Warranty may be voided if safety instructions are violated or if the device is mishandled.