Further information for Synergy 21 S21-LED-SR000057 LED Controller 4-Channel IP66
General
Degree of protection
IP66
Operating voltage
12-36 VDC
Connected load
4x5 A
Radio frequency
868,3 MHz
Transmitting power
>5 dBm
Reception range
15 Metres
Operation temperature
-10 to +50 °C
Colour programs
10 predefined
Programming speeds
16 selectable
Dimming stages
8 Staged
Compatibility
EOS 05 series
Status memory
The Synergy 21 LED Series EOS 05 4-Channel Controller is a wireless control device for LED lighting systems with constant voltage. It is designed for wireless control of LED strips in single, dual, or RGB/RGB-W technology and is compatible with the switches and remote controls of the EOS 05 series. The device enables intuitive selection of RGB colors via a color wheel and offers dimmable control of individual colors in 8 steps. It features 10 preset color programs and 16 adjustable program speeds, ranging from 4 seconds to 256 seconds. In the event of a power failure, the last operating state is saved, so the lighting resumes in the previous state once power is restored. The wireless reception range is up to 15 meters. The device is suitable for outdoor use, as it has the protection rating IP66, meaning it is dust-tight and protected against water jets from any angle. The operating temperature ranges from -10°C to +50°C, enabling use in various environments.
Applications
The controller is suitable for applications in both indoor and outdoor environments, particularly in residential and commercial spaces where flexible and decorative LED lighting is required. It is ideal for controlling LED strips in apartments, offices, restaurants, hotels, or architectural lighting. The functionality with RGB/RGB-W control enables diverse color design options that can be adapted to different moods or requirements. Compatibility with the EOS 05 series allows for consistent integration into existing or newly planned lighting systems.
Functions and Equipment in Detail
The device features four independent channels, each capable of controlling a maximum load of 5 amperes, allowing a total connected load of 4x5A. Control is wireless, with a transmission power of more than 5 dBm and a radio frequency of 868.3 MHz, which is license-free in the EU. Control is achieved via the EOS 05 series of wall dimmers, wall switches, and remote controls, each designed for mono, dual white (CCT), or RGB/RGB-W control. Color control is performed via a color wheel, enabling free selection of RGB colors. Individual colors are dimmable in 8 steps, allowing fine brightness adjustment. Ten preset color programs and 16 adjustable speeds offer diverse design possibilities. The status memory function ensures that the last operating state is restored after a power failure.
Technology Explained Simply
The controller operates with a constant voltage of 12 to 36 volts DC (direct current), which is typical for LED strips. The wireless technology uses the frequency 868.3 MHz, which is license-free in the EU. The transmission power of over 5 dBm ensures a stable connection with a range of up to 15 meters. The protection rating IP66 means the device is dust-tight and protected against water jets from any angle, making it suitable for outdoor use. The operating temperature range of -10°C to +50°C allows use in various climatic conditions. Dimensions are 180 mm length, 74 mm width, and 38 mm height, representing a compact design.
Compatibility and Accessories
The controller is compatible with switches and remote controls from the EOS 05 series, including mono wall dimmers, dual white (CCT), RGB, AC RGB-W wall switches, and remote controls with various channel counts (1, 2, 4, 6 channels) for RGB-W control. Additionally, various waterproof cable connectors are available, such as outdoor cable connectors IP68 1:1 with 2- or 3-way terminals, waterproof connector boxes with 3 or 4 ports, and solder-shrink connector sets offering IP67 protection. These accessories enable secure and waterproof connections between LED strips and the controller.
Installation and Mounting
Installation must be carried out by qualified personnel. Before mounting, power must be switched off to avoid electrical hazards. The controller is connected to a power supply of 12 to 36 VDC. LED strips are connected via appropriate cable connectors, with waterproof connectors recommended for outdoor applications. The wireless connection to the EOS 05 series switches and remote controls is established automatically. The devices are intended for use in well-ventilated areas to prevent overheating.
Operational Advantages
The controller offers flexible and intuitive control of LED lighting with diverse color and dimming options. Wireless control enables convenient operation without cable connections. The status memory function ensures continuous use even after power failures. The high protection rating IP66 and operating temperature range of -10°C to +50°C make the device suitable for outdoor use. Compatibility with the EOS 05 series ensures a consistent and expandable lighting solution.