| Technical data |
| Dimmable | Yes, depending on power supply |
| Protection class | IP20 |
| Ampere (CC) | 0,20 A |
| Operation temperature | -10 to +60 degrees |
| Size | 86 x 86 x 32 mm |
The Synergy 21 LED Series EOS 05 wall switch RGB-W is a wireless-controlled switch for operating LED lighting systems. It serves as a control unit for RGB/RGB-W lighting and enables control of up to four lighting zones. The switch is specifically designed for use with controllers from the EOS 05 series, including models 103504, 111315, 112694, 113466, 116291, and 116292. Control is wireless, with communication taking place at the frequency 868.3 MHz (EU-approved, license-free). The transmission power exceeds 5 dBm, enabling a range of up to 15 metres. Power supply is via an external power adapter providing 12 V DC, with a maximum current consumption of 0.20 A. The operating temperature ranges from -10 °C to +60 °C. The dimensions of the wall switch are 86 x 86 x 32 mm, and it features a protection class IP20, making it suitable for use in dry indoor environments.
Applications
The wall switch is intended for indoor use, particularly in residential and commercial spaces where flexible and intuitive control of LED lighting is required. It is suitable for applications such as living room lighting, office lighting, or decorative lighting, where multiple light zones need to be controlled independently. The functionality is oriented towards controlling RGB/RGB-W LED systems, with colour control via a colour wheel that allows intuitive selection of the desired colour.
Functions and Equipment in Detail
The switch offers intuitive operation via a colour wheel, allowing free selection of colours. Individual colours are dimmable in eight steps, enabling precise brightness adjustment. Additionally, ten pre-set colour programs are available, which can be used for different moods or applications. The speed of colour transitions is adjustable in 16 steps, with durations ranging from 4 seconds to 256 seconds. Up to four receivers can be programmed per remote control, enabling control of multiple lighting units from a single control point. In the event of a power failure, the last state is saved, so the lighting resumes in the previous state once power is restored.
Technology Explained Simply
The wireless technology operates at the frequency 868.3 MHz, which may be used license-free in the EU. The transmission power of over 5 dBm ensures a stable connection over a distance of up to 15 metres. Power supply is via an external power adapter providing 12 V DC, with a maximum current consumption of 0.20 A. The protection class IP20 means the switch is protected against contact with fingers and against solid foreign objects, but not against splashing water or moisture. The operating temperature range of -10 °C to +60 °C allows use in a wide variety of indoor environments, even with temperature fluctuations.
Compatibility and Accessories
The wall switch is compatible exclusively with controllers from the EOS 05 series. As accessories, various power supply variants are available, including the LED power supply 12V 10W round IP67 and the HEP power supply 12V 12W for in-wall mounting. Other compatible components include the LED Series EOS 05 4-channel controller + V2, the LED Series EOS 05 4-channel controller IP66, the remote controls RGB-W 1 and RGB-W 2, and the wall dimmer Dreh-Dim RGB. These components enable extended control and customisation of the lighting system.
Installation and Mounting
Installation is carried out on a wall, taking into account the dimensions of 86 x 86 x 32 mm. Mounting should be performed by qualified professionals, and power must be switched off before installation. Use in damp or wet environments is not intended, as the protection class IP20 does not provide waterproofing.
Operational Advantages
The wall switch offers intuitive and user-friendly operation, with colour control via a colour wheel. The ability to control up to four lighting zones independently provides flexibility in designing lighting scenarios. The storage of the last state during power failure ensures continuous operation. Wireless technology allows flexible placement of the switch, independent of the position of the lighting units, as long as the 15-metre range is not exceeded. Compatibility with various controllers from the EOS 05 series expands application possibilities and enables a scalable lighting solution.