Synergy 21 S21-LED-J00132, EAN: 4038816047762

Synergy 21 S21-LED-J00132 LED Power Supply 36V 1050mA

Light Systems > Accessories > LED-Drivers 36V

Synergy 21 S21-LED-J00132 LED Power Supply 36V 1050mA

Lieske Part No. 726418
Mfg Part No S21-LED-J00132
EAN-Code 4038816047762
Manufacturer Synergy 21
Here only 11,34 EUR
13,49 EUR incl. VAT

Further information for Synergy 21 S21-LED-J00132 LED Power Supply 36V 1050mA

General
Input voltageAC100-240 V
Input frequency50-60 Hz
Input current0.5 A
Output voltage20-32 V
Output current1050 mA
Output power34 W
Operation temperature-40 to +70 °C
The LED power supply from Synergy 21, manufacturer's number S21-LED-J00132, is a constant current power supply for LED applications. It is designed to power LED luminaires and LED strips requiring a constant current of 1050 mA. The device is designed for use in indoor and outdoor environments, with the exact protection rating to be taken from the datasheet. The operating temperature ranges from -40 °C to +70 °C, enabling use in environments with varying climatic conditions. Dimensions are 148 mm length, 40 mm width, and 32 mm height, making the power supply compact and space-saving.

Applications
This power supply is designed for LED lighting systems requiring a constant current of 1050 mA. It is particularly suitable for LED panel luminaires, LED strips, and other LED modules operating on a 20–32 V DC voltage. The input voltage of AC 100–240 V at 50–60 Hz allows use in various countries with different mains voltages. The maximum output power is 34 W, sufficient for a wide range of LED loads.

Functions and Features in Detail
The power supply delivers a stable output current of 1050 mA at a voltage of 20–32 V DC. The constant current function ensures uniform brightness of LED lighting and protects LEDs from overload. The input power is up to 0.5 A at a mains voltage of 100–240 V. The operating temperature range of -40 °C to +70 °C demonstrates the device's robustness under extreme environmental conditions. Dimensions of 148 x 40 x 32 mm allow for compact mounting, for example in luminaire housings or on walls.

Technology Explained Simply
The power supply converts alternating current from the mains (AC 100–240 V) into direct current (DC 20–32 V), which is required for LED modules. The constant current function ensures that the current value remains constant regardless of fluctuations in load or input voltage. This extends the lifespan of LEDs and prevents unwanted brightness variations. The operating temperature range of -40 °C to +70 °C indicates that the device functions reliably even in cold or hot environments. The compact design facilitates integration into existing lighting systems.

Compatibility and Accessories
The power supply is compatible with LED modules requiring operation at 20–32 V DC and 1050 mA current. As accessories, various connection terminals from Wago's series 221 are available, including 2- and 3-wire connection terminals and a 5×4 mm variant. Additionally, a power cable with CEE7 plug and open end (1.8 m, black) is available for connection wiring. An LED cable with integrated steel wire (2×1.0 mm²) is also offered to ensure safe and flexible wiring.

Mounting and Installation
Installation must be carried out by qualified personnel. Before installation, the power supply must be switched off to avoid electrical hazards. Wiring must be executed correctly to prevent short circuits. The use of suitable connection terminals and cables is recommended to ensure safe and reliable power supply. The environment should be adequately ventilated to prevent overheating. During installation, correct alignment and secure fastening of the power supply must be ensured to minimize mechanical stress.

Operational Advantages
The power supply provides reliable power for LED lighting systems with constant current. The wide input voltage range allows use in various countries. The high operating temperature range ensures reliable operation even under extreme conditions. The compact design facilitates integration into existing systems. The use of qualified accessories such as connection terminals and cables ensures a safe and durable installation. The constant current function extends the lifespan of LEDs and ensures uniform brightness.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/726418
qrcode für Synergy 21 S21-LED-J00132 LED Power Supply 36V 1050mA