Further information for Synergy 21 S21-LED-F00213 LED Strip 5050 RGB DC24V 10m
Technical data
Beam angle
120 degrees
Protection class
IP20
Constant current or constant voltage
CV
Dimmable
Yes, depending on power supply
Volt
24 Volt
LED strip height
2 mm
LED strip cuttable
100 mm
Light colour name
RGB-WW
LED strip chip count
60
LED strip chip type
5050
Ampere (CC)
8,30 A
LED strip chip feature
ULS
LED strip width
15 mm
LED strip length
10000 mm
Watt
200 W
LED strip adhesive tape
Synergy 21 LED Flex Strip UL Series
ULS=Ultra Long Series
Voltage: 24V,
Watt: 200W, 20W/m
Light color: RGB+CCT, RGB+2400K+6000K
Brightness: 2400K=370lm/m, RGB+CCT= 1265lm/m
beam angle : 120°
Protection class: IP20
LED quantity: 60*5050SMD 5in1 LED per meter
Dimensions: 10000*15*3 mm
PCB color: white, open cable end (360±5mm)
Working temperature: -25°C to +40°C
All can be shortened 6 LED
adhesive tape: yes 3M on the back
Energy efficiency class: A
kWh/1000h: 220
Strip can be shortened at the cutting marks with sharp scissors.
!Danger! Strip must first be checked for functionality.
Only share the strip when there is no power.
Our 3M adhesive tape is well-adhesive, but should still only be seen as an assembly aid.
There are a variety of fastening options, such as clips, permanently elastic mounting adhesive, cable ties, etc.
Please note that LED strips also need to be cooled.
Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.
No guarantee can be given on overheated LED strips