Further information for Synergy 21 S21-LED-F00196 LED Strip 4020 60 NW
Technical data
LED strip width
10 mm
LED strip length
5000 mm
Constant current or constant voltage
CV
Dimmable
Yes, depending on power supply
Volt
24 Volt
Beam angle
120 degrees
Light colour name
Neutral white
Protection class
IP65
CRI
>90 CRI
LED strip chip count
60
LED strip chip feature
sideview
LED strip height
2 mm
Light colour in Kelvin
4500 K
LED strip cuttable
50 mm
Ampere (CC)
2 A
Watt
48 W
Lumens
4705 LM
LED strip adhesive tape
Synergy 21 LED Flex Strip Length: 5m Voltage: 24V, Watt: 9.6W/m, 48W Light color: nw, 4500K, CRI>90 Brightness: 970lm/m, Total: 4850lm Beam angle: 120° Protection class: IP65 Number of LEDs: 60 SMD/m, total: 300LEDs Dimensions: 5000*8*3 mm PCB color: white, open cable end red black (350±5mm) Working temperature: -25°C to +50°C Can be shortened every 6 LEDs 5cm Adhesive tape: yes 3M Energy efficiency class on the back
: A+ kWh/1000h: 52.8
Strip can be shortened at the cutting marks with sharp scissors. !Danger! Strip must first be checked for functionality. Only share the strip when there is no power.
Our 3M adhesive tape is well-adhesive, but should still only be seen as an assembly aid. There are a variety of fastening options, such as clips, permanently elastic mounting adhesive, cable ties, etc.
Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given on overheated LED strips.