Further information for Synergy 21 S21-LED-F00158 LED Strip 2835 60 NW
Technical data
Dimmable
Yes, depending on power supply
Beam angle
120 degrees
Light colour name
Neutral white
LED strip chip count
60
Constant current or constant voltage
CV
Protection class
IP20
CRI
>80 CRI
LED strip width
10 mm
LED strip chip type
2835
Volt
48 Volt
Light colour in Kelvin
4250 K
LED strip height
1,8 mm
LED strip chip feature
ULS
LED strip length
30000 mm
LED strip cuttable
250 mm
Watt
210 W
Lumens
30300 LM
Ampere (CC)
8,70 A
LED strip adhesive tape
Synergy 21 LED Flex Strip UL Series ULS=Ultra Long Series Voltage: 48V, max4.375A Watt: 210W±10% Light color: neutral white, 4250K±250k Brightness: 30300lm Beam angle: 120° Protection class: IP20 LED quantity: 1800*2835SMD Dimensions: 30000*10*3 mm PCB color: white, open cable end (360±5mm) Working temperature: -25°C to +40°C Weight: 0.500 kg Can be shortened every 15 LED 25cm Adhesive tape: yes 3M on the back
Energy efficiency class: A++ kWh/1000h : 231
Strip can be shortened at the cutting marks with sharp scissors. !Danger! Strip must first be checked for functionality. Only share the strip when there is no power.
Our 3M adhesive tape is well-adhesive, but should still only be seen as an assembly aid. There are a variety of fastening options, such as clips, permanently elastic mounting adhesive, cable ties, etc.
Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given on overheated LED strips