Further information for Synergy 21 S21-LED-F00154 LED Strip 2835 30 NW
Technical data
Dimmable
Yes, depending on power supply
Beam angle
120 degrees
Light colour name
Neutral white
Constant current or constant voltage
CV
LED strip height
2 mm
Volt
24 Volt
Protection class
IP20
CRI
>80 CRI
LED strip width
10 mm
LED strip chip type
2835
Light colour in Kelvin
4250 K
LED strip chip count
30
LED strip chip feature
ULS
LED strip length
20000 mm
LED strip cuttable
165 mm
Watt
130 W
Ampere (CC)
5,40 A
Lumens
13000 LM
LED strip adhesive tape
Synergy 21 LED Flex Strip UL Series
ULS=Ultra Long Series
Voltage: 24V, max5.4A
Watt: 130W±10%
Light color: neutral white, 4250K±250k
Brightness: 13000lm
Beam angle: 120°
Protection class: IP20
LED quantity: 600*2835SMD
Dimensions: 20000*10*3 mm
PCB color: white, open cable end (360±5mm)
Working temperature: -25°C to +40°C
Weight: 0.500 kg
Can be shortened every 10 LED 16.5cm
Adhesive tape: yes 3M on the back
Energy efficiency class: A
kWh /1000h: 143
strip can be shortened at the cutting marks with sharp scissors.
!Danger! Strip must first be checked for functionality.
Only share the strip when there is no power.
Our 3M adhesive tape is well-adhesive, but should still only be seen as an assembly aid.
There are a variety of fastening options, such as clips, permanently elastic mounting adhesive, cable ties, etc.
Please note that LED strips also need to be cooled.
Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.
No guarantee can be given on overheated LED strips