Further information for Synergy 21 S21-LED-F00146 LED Strip 2835 60 NW
Technical data
Dimmable
Yes, depending on power supply
Beam angle
120 degrees
Light colour name
Neutral white
LED strip chip count
60
Constant current or constant voltage
CV
Volt
24 Volt
Protection class
IP20
CRI
>80 CRI
Watt
96 W
LED strip width
10 mm
LED strip chip type
2835
Light colour in Kelvin
4250 K
LED strip height
1,8 mm
LED strip chip feature
ULS
LED strip length
20000 mm
Ampere (CC)
4 A
Lumens
8100 LM
LED strip cuttable
165 mm
LED strip adhesive tape
Synergy 21 LED Flex Strip UL series
ULS=Ultra Long series
Voltage: 24V, max4A
Watt: 96W±10%
Light color: neutral white, 4250K±250k
Brightness: 8100lm
Beam angle: 120°
Protection class: IP20
LED number: 1200*3528SMD
Dimensions: 20000* 10*3 mm
PCB color: white, open cable end (360±5mm)
Working temperature: -25°C to +40°C
Weight: 0.500 kg
Can be shortened every 10 LED 16.5cm
Adhesive tape: yes 3M on the back
Energy efficiency class: A+
kWh/1000h : 105.60
Strip can be shortened at the cutting marks with sharp scissors.
!Danger! Strip must first be checked for functionality.
Only share the strip when there is no power.
Our 3M adhesive tape is well-adhesive, but should still only be seen as an assembly aid.
There are a variety of fastening options, such as clips, permanently elastic mounting adhesive, cable ties, etc.
Please note that LED strips also need to be cooled.
Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.
No guarantee can be given on overheated LED strips