Further information for Synergy 21 S21-LED-F00107 LED Strip 3528 60 12V IP65
Technical data
Dimmable
Yes, depending on power supply
Beam angle
120 degrees
LED strip chip count
60
LED strip length
5000 mm
Constant current or constant voltage
CV
Volt
12 Volt
Protection class
IP65
LED strip cuttable
50 mm
LED strip chip type
2835
Ampere (CC)
2 A
Watt
24 W
LED strip width
11 mm
LED strip height
4.80 mm
Light colour name
IR 940nm
Light colour in nm
940 nm
LED strip adhesive tape
The Synergy 21 LED Flex Strip S21-LED-F00107 is a 5000 mm long, dimmable LED strip for outdoor use, specifically designed for security and surveillance purposes. It emits infrared light with a wavelength of 940 nm, making it suitable for use in combination with infrared-compatible camera systems. The light operates at a voltage of 12 volts and consumes 24 watts at a current draw of 2 amperes. The technology is based on SMD-LEDs of type 2835, arranged at a density of 60 LEDs per meter, corresponding to a total of 300 LEDs. The light emission occurs with a beam angle of 120 degrees, achieving broad and even illumination. The IP65 protection class ensures dust-tight and splash-proof operating characteristics, enabling the strip to be used outdoors and in damp environments.
Applications
The LED strip is primarily intended for use in security and surveillance systems, especially in combination with infrared-compatible surveillance cameras. The wavelength of 940 nm is optimized for invisible infrared illumination in the near range, enabling the camera to capture clear images in darkness or poor lighting conditions. Due to the IP65 protection class, the strip is suitable for outdoor use, for example on buildings, in garages, on fence sections, or in other areas requiring constant surveillance.
Functions and Equipment in Detail
The strip features a silicone adhesive tape on the back, enabling easy and secure mounting on smooth surfaces. The LED technology is based on constant voltage (CV), meaning the connected power supply must provide a stable voltage of 12 volts. Dimmability depends on the power supply used, allowing brightness to be adjusted according to specific requirements. The LED modules are marked at intervals of 50 mm, allowing the strip to be cut at these points using a sharp scissors. Before cutting, it must be ensured that no voltage is applied, and the functionality of the strip should be checked before cutting.
Technology Explained Simply
The SMD-LEDs of type 2835 used are designed for high light output and long service life. The infrared wavelength of 940 nm is not visible in the visible spectrum, making the illumination undetectable for surveillance purposes. The IP65 protection class means the strip is protected against dust and splashing water, making it suitable for outdoor use. The operating temperature must not exceed 40°C to ensure service life. Sufficient cooling and ventilation are required, especially during prolonged operation or in enclosed spaces.
Compatibility and Accessories
Various accessories are available to extend and integrate the LED strip into existing systems. These include waterproof connector boxes with 3 or 4 ports, waterproof 1:1 and 1:2 connectors, and solder-shrink connectors offering IP67 protection. For operation, a suitable power supply is required, for example, a MEAN WELL power supply with 12V/120W and IP67 protection. Additionally, a dusk-to-dawn switch is available, enabling automatic operation in darkness. Silicone mounting clips serve as additional mounting aids.
Installation and Mounting
Mounting is done using the integrated silicone adhesive tape, which allows secure attachment to smooth surfaces. During installation, care must be taken to avoid operating the strip in enclosed, poorly ventilated areas to prevent overheating. Cutting the strip is only possible at marked points and without applied voltage. Wiring is done via the provided connection points, with waterproof connectors recommended to maintain the IP65 protection class.
Advantages in Operation
The LED strip provides reliable and energy-efficient infrared illumination for surveillance systems. The IP65 protection class enables outdoor use, while the dimmable function allows adaptation to different lighting conditions. Easy mounting via adhesive tape and cuttable in 50 mm increments increases installation flexibility. The use of SMD-LEDs 2835 ensures high light output and long service life, provided the operating temperature of 40°C is not exceeded.