Synergy 21 S21-LED-F00106, EAN: 4038816140456

Synergy 21 S21-LED-F00106 LED Strip 3528 IR 12V

Light Systems > LED-Stripes

Synergy 21 S21-LED-F00106 LED Strip 3528 IR 12V

Lieske Part No. 284563
Mfg Part No S21-LED-F00106
EAN-Code 4038816140456
Manufacturer Synergy 21
Here only 70,20 EUR
83,54 EUR incl. VAT

Further information for Synergy 21 S21-LED-F00106 LED Strip 3528 IR 12V

Technical data
DimmableYes, depending on power supply
Beam angle120 degrees
LED strip chip count60
LED strip length5000 mm
Constant current or constant voltageCV
Volt12 Volt
Protection classIP65
LED strip cuttable50 mm
LED strip chip type2835
Ampere (CC)2 A
Watt24 W
LED strip height4.50 mm
LED strip width11 mm
Light colour nameIR 850nm
Light colour in nm850 nm
LED strip adhesive tapeYes
The Synergy 21 LED Flex Strip S21-LED-F00106 is a 5000 mm long, dimmable infrared LED strip for outdoor use. It is specifically designed for security applications requiring an invisible light source in the 850 nm range, for example, for night vision support in surveillance cameras. The strip operates at a voltage of 12 volts and consumes 24 watts at a current draw of 2 amperes. The LED chips of type 2835 are arranged at a density of 60 per meter, corresponding to a total of 300 LEDs. The beam angles are 120 degrees, enabling broad light distribution. The IP65 protection class ensures dust-tight and splash-proof operating characteristics, so the strip functions reliably even under outdoor conditions such as rain or humidity.

Applications

The LED strip is primarily intended for security and surveillance systems outdoors. The infrared illumination in the wavelength range of 850 nm is invisible to the human eye but is detected by many night vision cameras. This makes the strip ideal as an invisible lighting solution for surveillance purposes, for example, on buildings, fence sections, or in parks. The IP65 protection class makes it suitable for use in damp or wet environments without impairing functionality.

Functions and Equipment in Detail

The strip features an integrated adhesive tape on the back, enabling easy and secure mounting on smooth surfaces. It is cuttable in 50 mm increments, with markings on the strip indicating the cut points. Cutting is done with a sharp scissors, and the strip should be checked for functionality beforehand and must only be cut when de-energized. The maximum operating temperature is 40 °C; exceeding this temperature may compromise the strip’s lifespan. Therefore, sufficient cooling and ventilation are required during installation, especially for longer installations or in enclosed spaces.

Technology Explained Simply

The strip operates in constant voltage mode (CV), meaning it is connected to a 12-volt power supply that delivers stable voltage. Dimmability depends on the power supply used — a suitable, dimmable power supply is required to adjust brightness. The 2835 type LED chips are small and energy-efficient, achieving high light output with low energy consumption. The infrared wavelength of 850 nm is optimally positioned within the visible light sensitivity range of camera systems while remaining invisible to the human eye.

Compatibility and Accessories

For extending and connecting multiple strips, various waterproof cable connectors are available, including 1:1 and 1:2 connectors, as well as connector boxes with 3 or 4 ports. These are designed for outdoor use and meet protection classes such as IP67 or IP68. Additionally, silicone mounting clamps and hollow bushings with screw terminals are available, supporting secure and weather-resistant installation. A dusk-to-dawn switch enables automatic activation of the strip at darkness. For power supply, a suitable 12-volt power supply is required, for example, the MEAN WELL 12V 120W IP67 power supply.

Installation and Mounting

Mounting is done using the integrated adhesive tape, allowing secure attachment to smooth surfaces. During installation, ensure the strip is not operated in enclosed, poorly ventilated spaces to avoid overheating. Cutting is done at the designated markings using a sharp scissors, with the strip checked for functionality beforehand and processed only when de-energized. Connecting multiple strips is done via waterproof cable connectors, also suitable for outdoor use.

Operational Advantages

The LED strip provides reliable, invisible infrared illumination, ideal for surveillance systems. The IP65 protection class ensures safe outdoor operation, and the dimmable function allows brightness adjustment according to specific requirements. Cuttable in 50 mm increments offers flexibility for adapting to different mounting conditions. Integrated cooling and the specified maximum operating temperature of 40 °C ensure long service life when installation guidelines are followed.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/284563
qrcode für Synergy 21 S21-LED-F00106 LED Strip 3528 IR 12V