Synergy 21 S21-LED-F00104, EAN: 4038816060433

Synergy 21 S21-LED-F00104 LED Strip 3528 60 NW

Light Systems > LED-Stripes

Synergy 21 S21-LED-F00104 LED Strip 3528 60 NW

Lieske Part No. 428047
Mfg Part No S21-LED-F00104
EAN-Code 4038816060433
Manufacturer Synergy 21
Here only 12,10 EUR
14,40 EUR incl. VAT

Further information for Synergy 21 S21-LED-F00104 LED Strip 3528 60 NW

Technical data
DimmableYes, depending on power supply
Beam angle120 degrees
Light colour nameNeutral white
LED strip chip count60
LED strip length5000 mm
Constant current or constant voltageCV
LED strip height2 mm
Volt12 Volt
CRI&gt80 CRI
Lumens1650 LM
Light colour in Kelvin5000 K
LED strip cuttable50 mm
LED strip width10 mm
LED strip chip type2835
Ampere (CC)2 A
Watt24 W
Protection classIP67
LED strip adhesive tapeYes
The Synergy 21 LED Flex Strip with manufacturer number S21-LED-F00104 is a flexible, waterproof lighting element for use indoors and outdoors. The product is designed as an LED strip, producing a light colour of neutral white (5000 K ± 250 K) and offering a luminous output of 1650 lumens at an energy consumption of 24 watts. The lighting unit is designed for a length of 5000 mm, with dimensions of 5000 mm × 10 mm × 2 mm. The LED chips of type 2835 are arranged at a density of 60 per metre, resulting in a total of 300 LEDs. The light emission occurs with a beam angle of 120 degrees, achieving an even and broad light distribution. Power supply is via 12 volts direct current (DC), with a current of 2 amperes. The operating voltage is constant, i.e. constant voltage (CV), ensuring stable light performance. The protection class IP67 guarantees dust-tight and waterproof construction, allowing the strip to be used in damp or wet environments, such as outdoors. The rear of the strip features an adhesive tape, enabling easy mounting on smooth surfaces. The strip is cuttable in 50-mm increments, with markings on the strip indicating the cutting points. Before cutting, it must be ensured that no voltage is applied, and the functionality of the strip should be checked before cutting. The maximum operating temperature is 40 °C; exceeding this may affect the lifespan, so sufficient cooling and ventilation must be ensured during installation.

Applications include illuminating facades, terraces, stairs, kitchen backsplashes, cabinets, or as accent lighting in residential and commercial spaces. The waterproof design makes the strip particularly suitable for outdoor applications where moisture or rain may occur. The neutral white light colour provides clear, natural illumination, integrating well into modern and functional spaces.

Functions and equipment in detail include integrated mounting assistance via the adhesive tape, high luminous output at low energy consumption, and dimmable functionality, which however depends on the used power supply. The LED chips are arranged densely to ensure homogeneous light distribution without visible light points. The cuttability in 50-mm increments allows individual adaptation to the respective mounting surface. The IP67 protection class protects against dust and temporary water pressure, enabling use in damp or wet environments.

Technology explained simply shows that the LED technology is based on 2835 chips, known for high luminous output and long lifespan. The constant voltage supply (CV) ensures that the voltage remains stable regardless of the strip length, guaranteeing even brightness. The CRI value >80 means that colour rendering is good, ensuring natural representation of colours. The IP67 protection class means the strip is dust-tight and protected against temporary water pressure, making it suitable for outdoor use.

Compatibility and accessories include various waterproof cable connectors, such as 1:1 and 1:2 connectors, as well as waterproof connector boxes with 3 or 4 ports. Additionally, silicone mounting clamps and solder shrink connectors are available, enabling secure and waterproof connections. For power supply, a power unit with 12 V and 120 W IP67 is suitable and is also available in the range. The use of appropriate accessories is necessary to maintain the waterproof function of the strip.

Mounting and installation require the use of a suitable power supply and the designated cable connectors. Mounting is done using the integrated adhesive tape located on the rear of the strip. During installation, care must be taken to ensure the strip is not overloaded and is adequately ventilated to avoid exceeding the operating temperature of 40 °C. Cutting is done at the marked points using a sharp scissors, and the strip should be checked for functionality before cutting. The power supply must be switched off before mounting to avoid electrical hazards.

Operational advantages lie in the high luminous output at low energy consumption, easy mounting via the adhesive tape, cuttability, and waterproof design. The dimmable function allows brightness to be adjusted according to the specific usage situation. The long lifespan of the LEDs under correct cooling and operating temperature ensures low-maintenance operation. The use of appropriate accessories ensures a secure and durable installation, especially in damp or wet environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/428047
qrcode für Synergy 21 S21-LED-F00104 LED Strip 3528 60 NW