Further information for Synergy 21 S21-LED-C001112 LED Strip 3528 80 WW
Technical data
Beam angle
120 degrees
Light colour name
Neutral white
Protection class
IP20
Light colour in Kelvin
3000 K
LED strip length
5000 mm
Constant current or constant voltage
CV
Dimmable
Yes, depending on power supply
Volt
24 Volt
LED strip width
10 mm
LED strip cuttable
100 mm
CRI
>97 CRI
LED strip chip type
2835
LED strip height
1.50 mm
Ampere (CC)
2,50 A
Watt
60 W
Lumens
7920 LM
LED strip chip count
80
LED strip adhesive tape
Synergy 21 LED Flex Strip 2835 Series
2835=LED Chip Size 2.8mm x 3.5mm
Length: 5m
Voltage: 24V DC
Watt: 14.4W/m, 72W
Light Color: Warm White, 3000K, CRI>97
Brightness: 110Lm/W, 1584LM/m Total: 7920Lm
Beam angle: 120°
Protection class: IP20
LED number: 80*2835SMD/m, total: 400LEDs
Dimensions: 5000*10*2 mm
PCB color: white, open cable end red black (150±5mm)
Working temperature: -25°C to +40°C
Weight: 0.500 kg
Can be shortened all 6 LEDs, 100mm
Adhesive tape: yes 3M on the back
Energy efficiency class: A
kWh/1000h: 79.2
Strip can be shortened at the cutting marks with sharp scissors.
!Danger! Strip must first be checked for functionality.
Only share the strip when there is no power.
Our 3M adhesive tape is well-adhesive, but should still only be seen as an assembly aid.
There are a variety of fastening options, such as clips, permanently elastic mounting adhesive, cable ties, etc.
Please note that LED strips also need to be cooled.
Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.
No guarantee can be given on overheated LED strips.