Synergy 21 S21-LED-A00071, EAN: 4038816996589

Synergy 21 S21-LED-A00071 LED Strip Connector 4 Pins

Light Systems > LED-Stripes

Synergy 21 S21-LED-A00071 LED Strip Connector 4 Pins

Lieske Part No. 184800
Mfg Part No S21-LED-A00071
EAN-Code 4038816996589
Manufacturer Synergy 21
Here only 0,37 EUR
0,44 EUR incl. VAT

Further information for Synergy 21 S21-LED-A00071 LED Strip Connector 4 Pins

General
Connection type4Pin to 4Socket
Connection technologysoldering
CompatibilityS21-LED-A series strips
ApplicationRGB and single colour LED strips
Product typeSystem socket
ManufacturerSynergy 21
The item is a 4Pin connector from the brand Synergy 21, specifically designed for LED strips of the Series A. It serves as a system socket with four solder pins and four sockets, enabling secure and electrically reliable connections between divided LED strips of the S21-LED-A series. The design allows for direct soldering connections to the ends of the LED strips, ensuring stable power supply and signal transmission for RGB and single-color LED lighting systems. The connection is designed for use in installations where LED strips are divided into multiple sections, for example, to enable longer installations or flexible arrangements.

Applications
This connector is exclusively intended for LED strips of the S21-LED-A series. It is used to connect individual strip sections together, enabling longer lighting configurations. Its use is limited to systems requiring a 4-pole connection structure (e.g., for power supply and color control in RGB LEDs). The application is suitable for indoor and outdoor environments, provided the entire installation complies with the IP protection ratings of the components used.

Functions and Equipment in Detail
The connector features four solder pins, which are directly soldered to the circuit traces of the LED strips. The opposite side provides four sockets, designed for connection to another LED strip or a compatible plug. The compact design enables a clean, mechanically stable connection. The connection is made by soldering, ensuring a permanent electrical path. The component is not designed for direct use with screw terminals, but requires soldering to the strip ends.

Technology Explained Simply
The 4-pole connection structure enables transmission of power and control signals required for the operation of RGB LEDs or single-color LEDs. The solder pins ensure a firm electrical connection that does not loosen under load. The sockets on the other side allow connection to another strip end, ensuring continuous power and signal transmission. The connection is not waterproof, as no IP protection rating is specified; weather resistance therefore depends on the overall installation and the accessories used.

Compatibility and Accessories
The connector is exclusively compatible with LED strips of the S21-LED-A series. Compatible accessories available in the range include various waterproof cable connectors such as outdoor cable connectors IP68 1:1 with 2- or 3-way terminals, as well as solder shrink connectors with IP67 protection. These can be used additionally to make the connection waterproof, especially for outdoor applications. Other compatible components include hollow sockets and hollow plugs with screw terminals, which are not directly connectable to this connector but are intended for other connection types.

Installation and Mounting
Mounting is done by soldering the four pins directly to the circuit traces of the LED strip. The socket side is then connected to the other strip end, requiring another solder connection. Installation should be carried out by qualified professionals, with power switched off before starting work. The connection must be clean and free of short circuits to avoid electrical hazards. The use of additional waterproof connector boxes or shrink connector sets is recommended if the installation is operated outdoors or in damp environments.

Operational Advantages
Using this 4Pin connector ensures a stable and reliable electrical connection between LED strip sections. The solder connection provides high mechanical strength and minimizes the risk of contact loss. The specific design for the S21-LED-A series ensures perfect fit and compatible electrical parameters. The connection is easy to install if the required tools (soldering iron, solder) are available, and enables flexible lighting configurations without additional adapters or conversions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/184800
qrcode für Synergy 21 S21-LED-A00071 LED Strip Connector 4 Pins