| Technical data |
| Volt | 230 Volt |
| CRI | 80 CRI |
| Socket | E14 |
| Light colour in Kelvin | 1300-1500 K |
The Synergy 21 LED Retrofit lamp of the E14 series is designed for use in existing luminaires with an E14 socket. The product serves as an energy-efficient alternative to conventional incandescent lamps and allows direct replacement without modifying the socket. The lamps produce a warm, flickering light with a colour temperature of 1300 to 1500 Kelvin, making them particularly suitable for applications where a natural, flickering light atmosphere is desired, for example in living rooms, gastronomy areas or decorative lighting systems.
Applications
The LED lamp is intended for indoor use, particularly in rooms where decorative or atmospheric lighting is required. Due to its specific light colour and flickering effect, it is well-suited for applications where a classic incandescent bulb appearance is to be imitated. The operating temperature of 0 to 50 °C suggests use in normal indoor environments, with the ambient temperature not exceeding this range to ensure the lifespan of the LEDs.
Functions and Equipment in Detail
The lamp features an E14 socket, which is universally used in many small luminaires and lamps. The light colour of 1300–1500 K produces a warm, almost orange light, reminiscent of a candle flame or incandescent bulb. The light quality is characterised by a CRI value of 80, indicating sufficient colour rendering for everyday applications. The power consumption is between 0.5 and 1 Watt, resulting in an energy efficiency class A+. The energy efficiency class A+ and the value of 1 kWh/1000h highlight the high efficiency of the product.
Technology Explained Simply
The lamp uses 36 SMD2835 LEDs, arranged in a special configuration to simulate a flickering, flame-like light. This technology enables light output that visually resembles a burning flame, without generating actual heat or fire. The operating voltage of 100 to 240 volts makes the device suitable for use in Europe and many other regions, as it can be connected to standard mains voltage. The dimensions of 15.5 mm diameter and 64 mm length correspond to the format of typical E14 retrofit lamps.
Compatibility and Accessories
The lamp is designed exclusively for fixtures with an E14 socket. Use in existing luminaires with E14 sockets is directly possible without additional adapters or converters.
Installation and Mounting
Installation is done by simply screwing into an E14 socket. Before installation, ensure that the power circuit is switched off to avoid electrical hazards. The lamp should not be operated in closed, poorly ventilated enclosures, as this could impair cooling and reduce lifespan. The operating temperature of 0 to 50 °C must be maintained to ensure the warranty for the LED lifespan.
Operational Advantages
The LED lamp offers high energy efficiency with low power consumption and a long lifespan, typical of LED technology. The flickering light effect creates a warm, inviting atmosphere, which is advantageous in many decorative applications. Compatibility with E14 sockets enables easy replacement of existing lamps without any modifications. The warranty is 60 months, indicating the product's reliability.
Energy Efficiency and Environment
The energy efficiency class A+ and the low energy consumption of 1 kWh/1000h make the product an environmentally friendly and cost-efficient lighting solution. The use of LEDs significantly reduces power consumption compared to conventional incandescent lamps.