| General |
| Number of poles | 6 |
| Material | Plastic |
| Maximum current rating | 10 A |
| Maximum voltage | 240 V |
| Compatibility | KEFA (Phoenix® compatible) |
The 6-pole screw terminal from Synergy 21 serves as a connection component for LED lighting systems, particularly for Synergy21 LED strips. The component is made of plastic and is designed for a maximum load capacity of 10 Ampere at 240 Volts. It is a connector with six connection poles, compatible with KEFA plug systems, which are also interoperable with Phoenix® connectors. The terminal enables a secure and mechanically stable connection of cables, with the screw connection ensuring a firm electrical contact. Typical use is in the electrical installation of LED lighting, where reliable power supply and connection of individual strip sections are required.
Applications
The screw terminal is primarily intended for use with Synergy21 LED strips, but can also be used for other similar applications in the field of LED lighting. It is used for electrical connection of cables, for example when extending an LED strip system or connecting to a power supply. Use in damp or wet environments is not explicitly recommended, unless the entire installation meets the required protection requirements.
Functions and Equipment in Detail
The terminal features six connection points, each equipped with a screw connection for securing the cables. The plastic construction ensures high insulation capability and mechanical stability. The maximum current load capacity is 10 Ampere, which is sufficient for most LED strip applications, as these typically require significantly lower current levels. The voltage limit of 240 Volts covers standard alternating current networks in Europe. The terminal is lightweight, weighing 7 grams, which facilitates handling and installation.
Technology Explained Simply
The screw terminal operates on the principle of mechanical connection: the cable is inserted into the connection area and secured by tightening the screw. This ensures a stable electrical contact that remains intact even under vibration or movement. Compatibility with KEFA plug systems means the terminal can be integrated into existing installations with corresponding connectors. The use of plastic as material ensures high electrical insulation and protects against short circuits.
Compatibility and Accessories
The terminal is specifically developed for Synergy21 LED strips, but can also be used for other LED lighting systems with similar connection geometry. The connection is made via the six connection poles, used to supply the LED strips with power and signal (in controlled systems).
Installation and Mounting
Mounting is done by inserting the cable into the respective connection area and then tightening the screw. The connection must be tight, but not over-tightened, to avoid damaging the cable or the terminal. Installation should be carried out by qualified personnel, with the power switched off before starting work to avoid electrical hazards. The terminal is not intended for use in damp or wet environments, unless the entire installation meets the required protection requirements.
Operational Advantages
The screw terminal provides a reliable and durable connection that remains stable even under load. The simple mounting and low weight facilitate installation. Compatibility with KEFA plug systems allows flexible integration into existing systems. The use of plastic ensures high safety through insulation and protection against short circuits.