Further information for Synergy 21 LRV12W12 UNII LED Power Supply 12V
Technical data
Constant current or constant voltage
CV
Protection class
IP20
LED - housing shape
Round
Ampere (CC)
1 A
Size
55*22 mm
Dimmable
The LED power supply from Synergy 21, type LRV12W12 UNII, is a compact constant voltage (CV) device for use in recessed boxes. It delivers a direct voltage of 12 V DC with a maximum current of 1 A, corresponding to a power output of up to 12 W. The input side is designed for alternating voltages in the range of 100 to 240 V AC, making the device suitable for use in various power networks worldwide. The device is housed in a round enclosure with dimensions of 55 mm (diameter) × 22 mm (height) and features a protection class of IP20, meaning it is protected against contact with fingers and against solid foreign objects, but is not suitable for outdoor use or in damp environments. It is not dimmable and is exclusively intended for powering LED lighting systems requiring a constant voltage of 12 V.
Applications
This power supply is specifically designed for installation in recessed boxes, where the round shape of the enclosure allows for a precise fit in standardised boxes. It is suitable for indoor use, for example in apartments, offices, or commercial spaces, where LED lighting systems such as LED strips, small panel lights, or other 12 V LED modules are to be operated. Use in damp or wet areas is not intended due to the IP20 protection class.
Functions and Equipment in Detail
The device delivers a constant voltage (CV) of 12 V DC, regardless of the load up to 1 A. This ensures a stable power supply for LED modules, which are sensitive to voltage fluctuations. The input voltage range of 100 to 240 V AC allows operation in various countries and power networks. The power supply is not dimmable, meaning it does not offer integrated brightness control. The maximum power of 12 W is sufficient for small to medium LED applications, such as decorative lighting, accent lighting, or small recessed lights.
Technology Explained Simply
Constant voltage (CV) ensures that the connected LED lighting always receives the same voltage, regardless of how much current it draws. This is particularly important to protect the lifespan of the LEDs and to ensure uniform brightness. The IP20 protection class means the device is protected against contact with fingers and against the ingress of solid foreign objects with a diameter of at least 12.5 mm. However, it is not waterproof and not suitable for use in damp environments such as bathrooms or kitchens, unless installed in a protected recessed box that itself provides the required protection class. The round enclosure with dimensions 55 mm × 22 mm fits into standardised recessed boxes with a diameter of approximately 68 mm, such as the HW device box E2700 or E115.
Compatibility and Accessories
The power supply is compatible with LED lighting systems requiring an operating voltage of 12 V DC. It can be combined with various accessories to ensure safe and proper installation. These include, for example, inrush current limiters (EBN-OS /230), which reduce the current surge at switch-on and thus extend the lifespan of the power supply and the connected LED modules. For connection to the power network, a 230 V mains cable with protective earth contact CEE7 (plug) -> open end with wire end ferrules (1.8 m, black) can be used. For securing LED strips in the area of the recessed box, silicone mounting clips (pack of 10, 12 mm) are suitable. Installation in recessed boxes is done using hollow bushings or hollow connectors with screw terminals, which enable a secure electrical connection. Additionally, airtight or fire protection-rated device boxes (e.g. HW E2700, BS2700) can be used to meet requirements in specific application areas.
Installation and Mounting
Installation is carried out by inserting the power supply into a recessed box, where the round enclosure fits into the box. The electrical connection is made via the designated terminal clamps, which are connected to the appropriate cables (e.g. mains cable, LED strip cable). The use of hollow bushings or hollow connectors with screw terminals ensures a secure and durable connection. The recessed box must be installed in accordance with regulations, taking into account the IP20 protection class of the power supply. Wiring must comply with applicable electrical installation regulations.
Operational Advantages
The power supply provides reliable power for 12 V LED lighting systems with a maximum power of 12 W. The input voltage range of 100 to 240 V AC enables universal use. The compact round shape and low height of 22 mm allow for discreet installation in recessed boxes. The IP20 protection class provides sufficient protection against contact and foreign objects in indoor environments. The use of suitable accessories such as current limiters or special boxes increases the safety and lifespan of the entire system.