Further information for Synergy 21 LED-TOM-LEDLIGHTSnw LED Strip 24W
Technical data
Beam angle
120 degrees
CRI
>90 CRI
Light colour in Kelvin
4000 K
Light colour name
Neutral white
Protection class
IP20
LED strip length
5000 mm
Constant current or constant voltage
CV
Dimmable
Yes, depending on power supply
Volt
24 Volt
LED strip width
10 mm
LED strip cuttable
100 mm
Watt
24 W
Ampere (CC)
1 A
Lumens
2500 LM
LED strip height
1,6 mm
LED strip chip type
2210
LED strip chip count
70
LED strip adhesive tape
The Synergy 21 LED Flex Strip is a flexible, 5000 mm long LED luminaire for indoor use, designed for an operating voltage of 24 volts. The product is based on constant voltage technology (CV) and features a light colour temperature of 4000 Kelvin, corresponding to neutral white illumination. Light quality is ensured by a CRI value of over 90, providing natural colour rendering. The luminaire produces a luminous flux of 2500 lumens with a beam angle of 120 degrees, achieving even and broad illumination. The LED technology is based on 2210 chips, arranged at a density of 70 per metre, ensuring high light density and uniform illumination without visible light points.
Applications
The LED strip is suitable for indoor use where flexible, area lighting is required. Typical applications include indirect lighting in living and working spaces, illumination of shelves, cabinets, stairs, or accent lighting in offices and shops. Due to its IP20 protection class, the strip is not intended for use in damp or wet environments, but for dry indoor spaces with normal ambient humidity.
Functions and Equipment in Detail
The strip features a 3M adhesive tape on the back, enabling simple and temporary mounting on smooth surfaces. However, the adhesive tape serves only as a mounting aid; for permanent installations, additional measures such as clips, permanent elastic mounting adhesive, or cable ties are recommended. The strip is cuttable, with cut points marked every 100 mm, corresponding to a spacing of 7 LEDs. Before cutting, ensure the strip is not under voltage, and check the functionality of the remaining part beforehand.
Technology Explained Simply
The LED technology of the strip is based on 2210 chips, which combine low profile height (1.6 mm) with high light output. Power supply is via 24 volts, with the total power consumption of the 5-metre strip being 24 watts. The current draw is 1 ampere. Energy efficiency class A+ and a consumption of 26.4 kWh per 1000 operating hours highlight the product’s high efficiency. The operating temperature range of the strip is between -25 °C and +40 °C; exceeding the upper limit negatively affects lifespan. Adequate cooling and ventilation must therefore be ensured during installation.
Compatibility and Accessories
The strip is dimmable, with dimmability depending on the power supply used. Compatible accessories include, for example, the MEAN WELL power supply 24V 150W with 0-10V dimming function and IP65 protection, as well as various waterproof cable connectors such as IP68 connectors with 1:1 or 1:2 connections, and connector boxes with 3 or 4 ports. These components enable secure and weather-resistant connections, especially for outdoor connections or in damp indoor environments, although the strip itself is not designed for such environments.
Mounting and Installation
Mounting is best done on smooth, clean surfaces, with the 3M adhesive tape serving as temporary fixation. For permanent and secure installation, additional fastening methods such as clips or cable ties are recommended. Electrical connections are made via designated connection points, and the use of suitable cable connectors is recommended, especially for outdoor connections. Before installation, disconnect the power supply to avoid electrical hazards. Use of qualified specialist personnel is recommended.
Operational Advantages
The LED strip offers high light output with low energy consumption, resulting in low operating costs. Long service life and high light quality (CRI >90) ensure even and pleasant illumination. The flexibility of mounting and the ability to cut allow individual adaptation to various application scenarios. The use of 2210 chips ensures a compact design without compromising light performance.