Further information for Synergy 21 ALL1081 LED Power Supply CC Driver 8-16W
General
Application area
8-16W
Input voltage (nominal)
207-253 VAC
Input voltage (accepted)
180-270 VAC
Frequency
47-63 Hz
Dimming method
Phase-cut (leading/trailing edge)
Starting current
<300 mA
Output current
275 mA
Current tolerance
±10 %
Operation mode
Constant current (CC)
Output voltage range
28-58 V
Overvoltage protection (OVP)
ca. 60 V
Start time
200 ms
Light-up time
500 ms
Emergency lighting voltage (DC)
>30 VDC
Emergency lighting voltage (AC)
>24 VAC
Emergency lighting power
10 %
Operation temperature
-25 to 65 °C
Overall efficiency
84,5-88 %
Power factor
80-98 %
Thermal derating
ab 60 °C PCB
Thermal trip operation
ab 80 °C PCB
Breaking capacity
20 %
Primary dimmable
Emergency lighting function
The Synergy 21 power supply ALL1081 is a constant current driver for LED lighting in the power range of 8 to 16 watts. It is primarily dimmable and suitable for applications such as PAR38 spotlights, Point- or S21dual modules. The device operates in constant power mode (CC), ensuring stable output power regardless of slight load fluctuations. The input voltage is normally between 207 and 253 volts AC at a frequency of 47 to 63 hertz. However, it also accepts voltages in the range of 180 to 270 volts, with power consumption varying depending on the voltage.
Applications
This power supply is designed for use in indoor and outdoor environments, with an operating temperature range of -25 to 65 degrees Celsius, enabling a wide range of applications. It is particularly suitable for LED spotlights and luminaires requiring stable power supply and dimmability. The integrated emergency lighting function ensures that lighting continues to operate during a voltage drop below 30 volts DC or below 24 volts AC (at 10 % of rated power), which is relevant for safety applications.
Functions and Features in Detail
The device is primarily dimmable via phase-cut dimmers (leading- and trailing-edge dimmers), enabling flexible brightness control. The inrush current is less than 300 milliamperes, minimizing strain on the power grid. The output current is typically 275 milliamperes with a tolerance of ±10 %. The output voltage varies between 28 and 58 volts, with an overvoltage protection (OVP) activating at approximately 60 volts to protect the device. The start-up time is typically 200 milliseconds, and the time to reach full brightness is approximately 500 milliseconds.
Technology Explained Simply
The power supply operates with a high power factor between 80 and 98 %, ensuring efficient use of electrical energy. The overall efficiency is between 84.5 and 88 %. At a PCB temperature of 60 degrees Celsius, power is reduced (temperature derating) to avoid thermal stress. At 80 degrees Celsius, a thermal shutdown occurs, reducing output power to 20 % of rated power to protect the device from overheating. Dimensions are 74 mm (length) × 40 mm (width) × 23 mm (height), enabling compact installation.
Compatibility and Accessories
The power supply is compatible with a matching power cable 230V safety contact CEE7 (plug) -> open end with wire end ferrules, 1.8 m, black. This accessory enables a safe and standard-compliant connection to the power grid. The use of external dimmers is possible, provided they support phase-cut technology.
Mounting and Installation
Mounting is carried out in the usual manner for LED drivers, with electrical connections made according to the specifications in the datasheet. No specific mounting orientation is required, but sufficient air circulation should be ensured to minimize thermal stress. Wiring is done via the designated terminal clamps.
Operational Advantages
The combination of constant current performance, high efficiency, and integrated emergency lighting function makes this power supply a reliable solution for professional LED applications. Primary dimmability enables flexible light control, while thermal protection functions extend the device’s service life. The compact design facilitates installation in tight mounting conditions.