Synergy 21 ALL1080-PS01, EAN: 4038816986009

Synergy 21 ALL1080-PS01 power supply CC driver 30-60W

Illuminants > LED lamps > LED divers

Synergy 21 ALL1080-PS01 power supply CC driver 30-60W

Lieske Part No. 151483
Mfg Part No ALL1080-PS01
EAN-Code 4038816986009
Manufacturer Synergy 21
Here only 16,90 EUR
20,11 EUR incl. VAT

Further information for Synergy 21 ALL1080-PS01 power supply CC driver 30-60W

General
Application area30W-60W W
Output voltage range28...42 V
Mains voltage range230 V
Temperature range-25...75 °C
Power factor (PF)>90% %
Efficiency (ETA)>90% %
DimmabilityPrimary side -
Dimming methodPhase-cut dimming, phase-cut dimming, control/adjustment transformers -
Thermal deratingActive at PCB temperatures above 65°C -
Power selectionvia wire bridges W40/W50 -
Galvanic separationYes -
StandardsDIN EN 61000-6-3, DIN EN 61000-6-4, DIN EN 61547, DIN EN 55022, DIN EN 55011, DIN EN 55014-1, DIN EN 55014-2 -
RoHS compliantYes -
Adjustable power ratings30W, 40W, 50W, 60W W
Output power at 30W32 V
Output power at 50W32 V
Output power at 60W38 V
The LED power supply ALL1080_PS01 from Synergy 21 is a primary-side dimmable, power-regulated power supply for use in LED spotlights with a power rating of 30 to 60 watts. It is specifically designed for recessed spotlights, object spotlights, and floodlights, enabling flexible adjustment of the output power to suit the respective application. The output voltage ranges from 28 to 42 volts, with the exact voltage varying depending on the set power level – 32V at 30W and 50W, and 38V at 60W. The power supply operates with an input voltage of 230V ±10 % and is designed for operating temperatures between -25 °C and +75 °C. Power is supplied via the public mains, with input power consumption monitored to ensure correct settings.

Applications
This power supply is intended for use in professional lighting systems, particularly in outdoor and indoor environments where stable and dimmable power supply for LED spotlights is required. It is suitable for applications in residential, commercial, and industrial areas, as well as in small businesses. The galvanic isolation between input and output ensures high safety and is important for use in electrically hazardous environments.

Functions and Equipment in Detail
The power supply is dimmable on the primary side, meaning brightness is controlled via the mains voltage. It is compatible with phase-cut dimmers, phase-angle dimmers, and control and step-down transformers. The output power can be adjusted using two wire bridges (W40 and W50). In its factory-new state, the device is set to 60W; to adapt to other power levels, the bridges must be opened or closed accordingly. An active thermal derating ensures that when PCB temperatures exceed 65 °C, the output power is automatically reduced to prevent overheating.

Technology Explained Simply
The power supply operates as a CC-Driver (Constant Current), meaning it provides a constant current supply to the LED modules, regardless of fluctuations in mains voltage or load. Efficiency (ETA) is typically 91 %, with values exceeding 90 %. The power factor (PF) is typically 93 % and also exceeds 90 %, indicating efficient use of mains voltage and low current losses. Galvanic isolation protects against electrical hazards and enables safe installation.

Compatibility and Accessories
The power supply is designed for use with LED spotlights in the power range of 30 to 60 watts. It is compatible with a 230V mains cable with protective earth contact CEE7 (plug) with open end and wire end ferrules, 1.8 m long, black. The connection wires must be prepared with wire end ferrules before connecting to ensure a secure and durable connection. Cable routing inside the housing should be arranged so that cables are kept as far away as possible from the transformer and switching transistor to comply with EMC requirements.

Mounting and Installation
Mounting is done by securing the power supply PCB with four screws and matching toothed washers inside the housing. The toothed washer must be placed between the PCB copper side and the spacers to ensure a permanent earthing connection to the metal housing. Before mounting and commissioning, the mains plug must be disconnected. After mounting, a functional test (burn-in) is required, during which the input power (P_in) is checked to ensure the set power level is correct.

Operational Advantages
The power supply offers high efficiency and a good power factor, resulting in lower current losses and stable operational reliability. Primary-side dimmability enables flexible brightness control without additional electronic components. The integrated thermal shutdown protects the device from overheating. Compliance with EMC standards (e.g. DIN EN 55022, DIN EN 61000-6-3) ensures interference-free operation in various environments. The design is intended for use in professional lighting systems, and mounting and commissioning must be carried out by qualified technical personnel.

Standards and Regulations
The device complies with the standards DIN EN 61000-6-3, DIN EN 61000-6-4, DIN EN 61547, DIN EN 55022 (Class B), DIN EN 55011 (Class B), DIN EN 55014-1, and DIN EN 55014-2. These standards relate to electromagnetic compatibility, electromagnetic emissions, and immunity in residential, commercial, and industrial environments. The product is RoHS-compliant (2002/95/EC), excluding the use of hazardous substances.

Dimensions and Design
The power supply has dimensions of 140 mm (length) × 80 mm (width) × 27 mm (height). It is compact and designed for built-in installation in LED spotlights. Mounting is done via screw fastening in the housing, with electrical connections made via designated connection points.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/151483
qrcode für Synergy 21 ALL1080-PS01 power supply CC driver 30-60W