Replacement remote control for Angel Wing V2
How does it work to connect this remote control to the Angel Wing Panel 149407:
1. Disconnect the Angel Wing Panel from the power supply.
2. Switch the panel back on
3. Please do the following within 10 seconds:
press the desired zone number (0-99) and
press the ID button desired zone number (0-99) and the ID button
(very important that you complete this step twice)
the panel will now flash briefly once.
4. Turn off the power to the panel again (within 10 seconds)
5. The registration process is complete
6. Switch the panel back on and operate it with the remote control