General
Cable type	CAT6 UTP flat cable
Cable cross-section	4x1 mm
Connector	RJ45 on both sides
Assignment	EIA/TIA 568B
Contact gold plating	50 µm
Strand cross-section	32 AWG
Data transmission	up to 10-Gigabit Ethernet
PoE power	up to 30W
Temperature range	-40°C to +70°C
Certifications	UL, CE, RoHS

The SlimWire+ patch cable from Sylvania is an ultra-flat network cable specifically designed for use in confined spaces such as patch panels, cable ducts, and riser shafts. It connects network devices and enables the transmission of data, voice, and power over a single cable. The cable is rated CAT6 UTP and supports up to 10-Gigabit Ethernet as well as PoE (Power over Ethernet) up to 30W. It is therefore suitable for applications such as Voice over IP, analog telephony, ISDN, RS232, and other communication protocols. The wiring follows the EIA/TIA 568B standard, ensuring a standardized and compatible connection.

Applications

The SlimWire+ patch cable is particularly suitable for environments where space is limited. Due to its flat design of 4x1 mm, it can be easily installed in narrow channels, behind panels, or in riser shafts without stressing the structure. It is commonly used in office buildings, server rooms, hotels, or industrial environments where organized and space-efficient cabling is required. The high temperature resistance from -40°C to +70°C also makes it suitable for outdoor areas or industrial facilities where extreme environmental conditions may occur.

Features and Equipment in Detail

The cable features RJ45 connectors on both ends, equipped with 50 µm gold-plated contacts. This plating ensures a reliable electrical connection and protects against corrosion, extending the cable’s service life. The conductors are twisted in pairs and have a cross-section of 32 AWG, ensuring good signal transmission and minimal interference. The UTP structure (Unshielded Twisted Pair) is suitable for use in environments with low electromagnetic interference.

Technology Explained Simply

The CAT6 classification means the cable is designed for data transmission rates up to 10 Gbit/s over a distance of up to 55 meters, although the actual range depends on the network topology and the devices used. PoE up to 30W allows power supply to end devices such as IP cameras, access points, or phones over the same cable, eliminating the need for additional power sources. The EIA/TIA 568B wiring standard is an international norm that ensures compatibility with standard network devices. UL, CE, and RoHS certifications confirm compliance with safety and environmental standards.

Compatibility and Accessories

The SlimWire+ patch cable is compatible with all devices that support RJ45 connectors and meet the mentioned transmission standards. It can be used in existing network infrastructures to optimize cabling.

Installation and Mounting

Installation is done by simply plugging the RJ45 connectors into the corresponding sockets on network devices. Due to its flat shape, the cable is easy to route and can be installed without tools in narrow channels or behind panels. The cable should be routed in a way that avoids sharp bends or tension to maintain functionality.

Operational Advantages

The SlimWire+ patch cable reduces space requirements in cabling systems and improves clarity. The high temperature resistance and robust design with gold-plated contacts ensure reliable and long service life. Support for PoE and high data rates makes it a versatile solution for modern networks. The UL, CE, and RoHS certifications guarantee compliance with international standards for safety and environmental compatibility.