General
Cable type	CAT6 UTP flat cable
Strand cross-section	32AWG
Assignment	EIA/TIA 568B
Contact gold plating	50µm
Maximum PoE power	30 W
Supported data rate	10-Gigabit Ethernet
Temperature range	-40 to +70 °C
Plug connection	RJ45 on both sides
Certifications	UL, CE, RoHS

The SlimWire+ patch cable from Sylvania is an ultra-flat network cable designed for use in IT infrastructures, particularly in tight cabling environments such as patch panels, cable ducts, or riser shafts. It serves as a connection element between network devices, switches, routers, end devices, and other components in a local network. The cable is designed for use in modern networks and supports data transfer rates up to 10-Gigabit Ethernet. It is also suitable for power over Ethernet (PoE), with a maximum power consumption of up to 30 watts. Applications include Ethernet connections, Voice over IP, analog telephony, ISDN, and serial interfaces such as RS232.

Applications

The SlimWire+ patch cable is particularly suitable for environments where space-saving and orderly cable routing are priorities. Due to its flat design, it can be installed in narrow channels, behind furniture, or in riser shafts without affecting the structure. It is designed for indoor use and can be deployed in networks requiring high bandwidth and reliability. The temperature resistance from -40°C to +70°C allows use in environments with extreme climatic conditions, such as industrial facilities or outdoor areas, provided mechanical stress and environmental conditions permit.

Functions and Features in Detail

The cable is constructed as CAT6 UTP (Unshielded Twisted Pair), with four pairs each twisted together. The conductors have a cross-section of 32AWG, equivalent to approximately 0.20 mm in diameter. The wiring follows the EIA/TIA 568B standard, ensuring a standardized and compatible connection between devices. An RJ45 connector is fitted at both ends, with contacts plated with a 50 µm gold layer to ensure reliable electrical connection and corrosion protection. The flat cable design, with cross-sectional dimensions of 4x1 mm, enables compact installation.

Technology Explained Simply

The twisting of the wire pairs reduces electromagnetic interference (crosstalk) and improves signal quality, especially at high data transfer rates. The UTP technology (Unshielded Twisted Pair) means the cable has no additional shielding, which increases flexibility but limits installation in environments with high electromagnetic interference. The gold-plated contacts ensure a durable and corrosion-resistant connection, extending the cable’s lifespan. The PoE capability up to 30 W allows power supply to end devices such as IP cameras, access points, or phones via the network cable, eliminating the need for separate power sources.

The temperature resistance from -40°C to +70°C makes the cable suitable for use in various environments, including industrial facilities or outdoor areas, provided there are no mechanical stresses or direct weather exposure.

Compatibility and Accessories

The SlimWire+ patch cable is compatible with all devices supporting an RJ45 interface and meeting CAT6 and EIA/TIA 568B standards. It can be used in networks with 10/100/1000/10000 MBit/s data rates. The PoE capability up to 30 W enables use with devices supporting PoE standards (IEEE 802.3af/at). It is not specifically designed for particular accessories but serves as a universal connection element in the network.

Installation and Mounting

Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets on network devices. Due to its flat design, the cable can be routed in narrow channels or behind furniture. It is recommended not to bend or compress the cable excessively to maintain signal quality. The cable should be routed in a way that avoids mechanical stress or pulling forces.

Operational Advantages

The SlimWire+ patch cable offers a compact and flexible solution for network cabling. Its flat design reduces space requirements and simplifies installation in confined spaces. Support for 10-Gigabit Ethernet and PoE up to 30 W makes it suitable for modern network applications. The gold-plated contacts and high temperature resistance increase reliability and cable lifespan. Certifications UL, CE, and RoHS confirm compliance with international safety and environmental standards.