General
Cable type	CAT6 UTP flat cable
Assignment	EIA/TIA 568B
Contact gold plating	50 µm
Strand size	32 AWG
Cable cross-section	4x1 mm
PoE power	30 W
Ethernet support	up to 10-Gigabit
Temperature range	-40 to +70 °C
Certifications	UL, CE, RoHS
Connector	RJ45 on both sides

The SlimWire+ patch cable from Sylvania is an ultra-flat network cable specifically designed for use in tight cabling environments such as patch panels, cable ducts, and riser shafts. With its flat design, it creates additional space and simplifies cabling in spatially restricted areas. The cable is designed for use in modern networks and supports data transfer rates up to 10-Gigabit Ethernet. It is also suitable for Power over Ethernet (PoE), with a maximum power transmission of 30 watts. Applications include Ethernet networks, Voice over IP, analog telephony, ISDN, and RS232 interfaces. The cable is configured as CAT6 UTP (Unshielded Twisted Pair) and features a 4x1 mm cross-section. Both ends are fitted with RJ45 connectors wired according to the EIA/TIA 568B standard. The contacts are coated with a 50 µm gold layer, ensuring high contact quality and corrosion resistance. The conductors are twisted in pairs and have a diameter of 32 AWG. The product is certified with UL, CE, and RoHS, confirming compliance with international safety and environmental standards. The operating temperature range is between -40 °C and +70 °C, enabling use in a wide range of indoor and outdoor applications.

Applications

The SlimWire+ patch cable is particularly suitable for applications where space saving and easy cabling are prioritized. It is commonly used in server rooms, office installations, IT infrastructures, and during the installation of network devices. The flat shape allows for compact routing in cable ducts, behind furniture, or in riser shafts, without obstructing the structure. Due to PoE support up to 30 W, it is also suitable for powering IP cameras, access points, or VoIP phones, with power supplied via the network cable. Compatibility with 10-Gigabit Ethernet makes it suitable for high-performance networks requiring high data rates.

Features and Equipment in Detail

The cable features a CAT6 UTP structure, ensuring stable data transmission with minimal signal interference. The twisted pair conductors reduce electromagnetic interference and crosstalk. RJ45 connectors are installed on both ends and wired according to EIA/TIA 568B, ensuring standardized and compatible connections to network devices. The gold-plated contacts with a thickness of 50 µm ensure reliable electrical contact and increase the cable’s lifespan. The 32 AWG conductor gauge provides sufficient conductivity, even for longer connections. The flat design with a 4x1 mm cross-section reduces space requirements compared to conventional round patch cables.

Technology Explained Simply

The designation CAT6 UTP describes the cable category (CAT6) and shielding (UTP = Unshielded Twisted Pair), meaning unshielded. The twisted pair conductors reduce interference caused by electromagnetic fields. The EIA/TIA 568B wiring standard is an international norm defining the pin assignment in the RJ45 connector to ensure uniform connections. The gold-plated contacts improve contact quality and prevent oxidation, which is especially beneficial in humid or aggressive environments. PoE capability up to 30 W means the cable can transmit power to compatible devices via the network cable, eliminating the need for a separate power connection. The temperature resistance from -40 °C to +70 °C allows use in various environments, including outdoor areas or rooms with extreme temperatures.

Compatibility and Accessories

The SlimWire+ patch cable is compatible with all devices featuring an RJ45 interface and CAT6 support. It can be used in networks utilizing 10-Gigabit Ethernet, PoE, VoIP, analog telephony, ISDN, or RS232. Its use is not limited to specific brands or manufacturers, as it meets common standards. No special accessories are required, as the RJ45 connectors can be directly plugged into network devices, switches, routers, or end devices. The flat shape allows easy integration into existing cabling systems without requiring additional cable ducts or installation aids.

Installation and Mounting

Installation of the SlimWire+ patch cable is similar to conventional patch cables. The RJ45 connectors are simply plugged into the corresponding sockets on network devices or end devices. Due to its flat shape, the cable can be easily routed in confined spaces, such as cable ducts, behind panels, or in riser shafts. No special tools or aids are required. The connection is mechanically stable, and the gold-plated contacts ensure a reliable electrical connection. Cable routing can be done without additional fastening materials, provided the environment does not impose special mechanical stresses.

Operational Advantages

The SlimWire+ patch cable offers several operational advantages: the flat design reduces space requirements and simplifies cabling in confined areas. Support for 10-Gigabit Ethernet and PoE up to 30 W makes it suitable for modern network applications. The gold-plated contacts ensure high contact quality and longevity. UL, CE, and RoHS certifications confirm safety and environmental compatibility. The wide temperature range from -40 °C to +70 °C enables flexible use in various environments. Easy installation and compatibility with common standards reduce complexity during network setup and maintenance.