The Supermicro FAN-0082L4 is a housing fan with dimensions of 80 mm diameter and a height of 38 mm, specifically developed for use in server and workstation housings of the Supermicro product family. The fan is designed as an exhaust fan for the rear of the housing and is powered via a 4-pin Molex connector. It supports PWM technology (Pulse-Width Modulation), enabling precise control of rotational speed to adjust airflow and noise levels according to the current operating load. The maximum rotational speed is 5000 RPM, with an airflow specified at 68.3 CFM (Cubic Feet per Minute). The noise level is 45 dBA, which is considered acceptable for industrial use in server environments. The fan is integrated into a housing that allows direct mounting into the designated server models.
Applications
The FAN-0082L4 is intended for a range of Supermicro server and workstation models, including SC743I-645, SC743S1-650, SC743T-645, SC748S-R1000, SC743 i-500B, T-665B, TQ-1200B, TQ-650, TQ-650B, TQ-865B, TQ-865B-SQ, SC745 S2-R800, TQ-800, TQ-R1200B, TQ-R800, TQ-R800B, TQ-R920B, SC747 TG-R1400B-SQ, TQ-R1400B, TQ-R1620B, SC842 TQ-665B, TQ-865B, XTQ-R606B, SuperServer 7046T-6F, 7046T-H6R, as well as SuperWorkstation models 7047R-3RF4+ and 7047R-TRF. The fan is primarily used in 4U format, installed as an exhaust component in the rear panel of the housing to remove heat from the system’s interior.
Features and Equipment in Detail
The fan features PWM control, allowing dynamic adjustment of rotational speed to reduce cooling performance under low load and minimize operating noise. The rotational speed of 5000 RPM represents the maximum operating speed, achieved under high thermal load. The airflow of 68.3 CFM ensures sufficient air circulation to effectively cool internal components. The noise level of 45 dBA is typical for server environments and meets requirements for quiet yet efficient cooling. The fan is equipped with an integrated housing that enables direct mounting into the designated server models without requiring additional brackets or adapters.
Technology Explained Simply
PWM technology (Pulse-Width Modulation) allows precise control of fan speed via a signal that varies the duration of voltage pulses. The longer the signal is active, the higher the fan speed. This enables adaptive cooling, where the fan runs slower under low load and thus generates less noise. Power supply and control for the PWM function are provided via a 4-pin Molex connector. The dimensions of 80 mm x 80 mm x 38 mm fit exactly into the designated mounting openings of Supermicro server models.
Compatibility and Accessories
The FAN-0082L4 is specifically developed for the mentioned Supermicro server and workstation models. Compatibility is limited to the models listed in the product description.
Installation and Mounting
Mounting is performed into the designated openings of Supermicro server housings, with the integrated housing enabling direct fixation. Wiring is done via the 4-pin Molex connector, which connects to the appropriate power supply or control unit. No additional mounting accessories are required, as the fan is already equipped with the housing.
Operational Advantages
The PWM control enables energy-efficient and quiet operation that adapts to the current load. The high rotational speed of 5000 RPM ensures effective cooling when needed, while the noise level of 45 dBA is acceptable for server environments. Direct mounting without additional brackets reduces installation time and complexity. Use in specific Supermicro models ensures optimal fit and functionality within the system.