| General |
| Surge voltage withstand (Common Mode) | 10 kV |
| Surge voltage withstand (Differential Mode) | 6 kV |
| Electrical connection | Terminal, 6-pole |
| Maximum conductor cross-section | 2,5 mm² |
| Conductor type | solid, fine-stranded |
| Certificates, Standards |
| Protection rating | IP66 |
| Insulation class | insulation class II (safety insulation) |
| Impact resistance | IK08 |
| Protection symbol | D |
| Temperature range (operation) | -40..+40°C |
| Standard | DIN EN 12944 |
| Corrosion protection | corrosivity category C5 mid according to DIN EN ISO 12944, suitable for swimming pools, chlorine-resistant |
| Certification, designation | CE, ENEC, VDE |
| Dimensions, Weight |
| Weight | 7.2kg |
| Electrical connection |
| Connection | terminal, 6-pole, max. 2.5mm², solid wire, fine wire |
| Nominal voltage | 220..240V, 50/60Hz, AC |
| Surge voltage resistance | surge voltage resistance: 10kV (common mode); 6kV (differential mode) |
| Key data |
| Product type | floodlight |
| Product name | Floodlight FL 21 mini |
| Lamps |
| Lamps | with LED |
| Rated values | 6390lm | 45.7W | 139.8lm/W (begin service life); |
| Colour temperature | 3000K |
| Colour rendering index | CRI > 70 |
| Light colour | 730 |
| Supplement | prepared for through-wiring |
| Lighting technology |
| Light control | lens of PMMA |
| Cover | protective disc, transparent |
| Light distribution | A430002 |
| Light emission | direct distribution |
| Material, Colour |
| luminaire housing | diecast aluminium, powder-coated, SITECO metallic grey (DB 702S), sealing non-destructively replaceable |
| mounting bracket | steel, galvanised, powder-coated, SITECO metallic grey (DB 702S) |
| Mounting |
| Mounting method, mounting location | surface-mounted, to supporting structure, to the cross arm |
| Arrangement | single arrangement |
| Operating device |
| Control | D4i, Smart Interface (Zhaga) |
| Smart Interface above | Zhaga |
| Smart Interface below | Zhaga |
| Equipment | overheat protection, constant luminous flux control, time-dependent luminous flux control, flexible luminous flux parameterisation, pre-setting: logarithmic dimming characteristic |
| Service life |
| Rated service life | 100000h (L97/B10) at AT = 25°C |
The product from SITECO, type 5XA7776B2A1A, is a network protection device specifically designed for safeguarding data lines in industrial and commercial applications. It provides protection against transient overvoltages caused by lightning strikes, electrical disturbances, or other energy discharges. The device is intended for use in networks requiring high reliability and stability, particularly in environments where uninterrupted data transmission is essential.
Applications
This protection device is suitable for use in network infrastructures, especially in buildings with IT systems, industrial controls, or security installations. It protects connected devices such as switches, routers, servers, or end devices from voltage surges that could enter through data lines. The application typically occurs in combination with other protective measures within the building to form a complete overvoltage protection chain.
Functions and Equipment in Detail
The device features a surge withstand voltage of 10 kV in common-mode operation and 6 kV in differential-mode operation. These values refer to the maximum voltage the device can withstand without damage, where common mode describes interference voltage between the line and ground, and differential mode describes interference voltage between two lines. These values are critical for the reliability of protection under real operating conditions, especially under high energy impacts.
Technology Explained Simply
The electrical connection is made via a 6-pole terminal, designed for conductor cross-sections up to 2.5 mm². The terminal supports both solid and fine-stranded conductors, enabling flexible use in various installation scenarios. The construction ensures a secure and durable contact, which remains stable even under mechanical stress or vibration. The materials used are designed for industrial environments and offer high mechanical strength.
Compatibility and Accessories
The device is designed for use in networks with standard data lines. It can be used in combination with other overvoltage protection devices in a protection chain to ensure complete safeguarding of the installation. The exact integration depends on the network architecture and the specific requirements of the installation.
Mounting and Installation
Mounting is typically done in an enclosure or distribution unit. The 6-pole terminal allows for easy and secure connection of data lines. Installation does not require special tools, but compliance with electrical standards and regulations for wiring and grounding is essential.
Advantages in Operation
The operation of the protection device is maintenance-free and does not require regular inspection, as long as no visible damage or signs of overload are present. The high surge withstand voltage values ensure reliable protection, extending the lifespan of connected devices. The combination of robust design and high protection performance makes the device a suitable solution for critical applications where data loss or downtime must be avoided.