| General |
| Surge voltage withstand (Common Mode) | 10 kV |
| Surge voltage withstand (Differential Mode) | 6 kV |
| Electrical connection | Terminal, 6-pole |
| Max. conductor cross section | 2,5 mm² |
| Conductor type | solid, fine-stranded |
| Certificates, Standards |
| Protection rating | IP66 |
| Insulation class | insulation class II (safety insulation) |
| Impact resistance | IK08 |
| Protection symbol | D |
| Temperature range (operation) | -40..+40°C |
| Standard | DIN EN 12944 |
| Corrosion protection | corrosivity category C5 mid according to DIN EN ISO 12944, suitable for swimming pools, chlorine-resistant |
| Certification, designation | CE, ENEC, VDE |
| Dimensions, Weight |
| Weight | 7.4kg |
| Electrical connection |
| Connection | terminal, 6-pole, max. 2.5mm², solid wire, fine wire |
| Nominal voltage | 220..240V, 50/60Hz, AC |
| Surge voltage resistance | surge voltage resistance: 10kV (common mode); 6kV (differential mode) |
| Key data |
| Product type | floodlight |
| Product name | Floodlight FL 21 iQ mini |
| Lamps |
| Lamps | with LED |
| Rated values | 11980lm | 87.2W | 137.4lm/W (begin service life); |
| Colour temperature | 3000K |
| Colour rendering index | CRI > 70 |
| Light colour | 730 |
| Supplement | prepared for through-wiring |
| Lighting technology |
| Light control | lens of PMMA |
| Cover | protective disc, transparent |
| Light distribution | A610002 |
| Light emission | direct distribution |
| Material, Colour |
| luminaire housing | diecast aluminium, powder-coated, SITECO metallic grey (DB 702S), sealing non-destructively replaceable, please order mast flange separately |
| mast bracket | steel, galvanised, powder-coated, SITECO metallic grey (DB 702S) |
| Mounting |
| Mounting method, mounting location | surface-mounted, to mast |
| Arrangement | single arrangement |
| Operating device |
| Control | iQ Comfort/DALI |
| Equipment | optimised constant luminous flux control (CLO 2.0), Desk-Remote (wireless, voltage-free reading and setting of iQ features in the workshop via application-optimized NFC function/RFID function), Light-Fading, Smart-Wire, Night-Set, Lumen-Switch, Temp-Guard, Auto-Match, pre-setting: linear dimming characteristic |
| Service life |
| Rated service life | 100000h (L97/B10) at AT = 25°C |
The article 5XA7771C2C3A from SITECO is a network protection device designed specifically for use in industrial and commercial installations. It protects data lines against overvoltages caused by lightning strikes or electrical disturbances in the network. The device is intended for use in networks with Ethernet connections and protects connected devices from transient voltage surges that could cause damage. The protection function is achieved through a combination of common-mode and differential-mode protection, with surge voltage withstand ratings specified for both modes.
Applications
This device is suitable for use in industrial environments where high electrical loads and sources of interference may occur. It can be used in networks with Ethernet connections, particularly in installations that communicate with other systems via cable connections. The protection function is especially relevant in areas where data lines are directly connected to the power grid or external facilities, for example in buildings with external connections or in production facilities with electrical machinery.
Functions and Equipment in Detail
The device features a 6-pole electrical connection implemented via terminals. These terminals are designed for conductors with a maximum cross-section of 2.5 mm² and support both solid and stranded conductors. The connection type enables a secure and reliable connection required for industrial applications. The surge voltage withstand rating is 10 kV in common-mode operation and 6 kV in differential-mode operation. These values ensure effective protection against overvoltages caused by electrical disturbances or lightning strikes.
Technology Explained Simply
Common-mode protection refers to disturbances occurring between all conductors and earth potential. Differential-mode protection, on the other hand, protects against disturbances occurring between individual conductors within a line. The combination of both protection types ensures that the device is effective against disturbances from earth potential as well as disturbances within the line. The terminal connection enables a mechanically stable and electrically reliable connection suitable for industrial use.
Compatibility and Accessories
The device is designed for use in Ethernet networks and can be connected with standard network cables. It is compatible with devices featuring Ethernet ports and can be integrated into existing networks.
Mounting and Installation
Mounting is done via the provided terminals, designed for conductors up to 2.5 mm². Installation does not require special tools or additional components, as the terminals are connected directly to the conductors. The device should be positioned as close as possible to the equipment to be protected to optimise the protection function.
Advantages in Operation
The high surge voltage withstand rating in both modes ensures reliable protection for connected devices. The terminal connection enables simple and secure installation suitable for industrial use. The device is designed for use in environments with high electrical loads and provides stable protection, enhancing operational safety.