SITECO 5TR10370Q, EAN: 4039806496386

SITECO 5TR10370Q mounting rail 4485x58x43 mm

SITECO 5TR10370Q mounting rail 4485x58x43 mm

Lieske Part No. 300547
Mfg Part No 5TR10370Q
EAN-Code 4039806496386
Manufacturer SITECO
Here only 65,55 EUR
78,00 EUR incl. VAT

Further information for SITECO 5TR10370Q mounting rail 4485x58x43 mm

General
Materialsteel sheet
Surface treatmentLacquered
ColourLuminous white
Construction3-pole
Through wiring7x 2,5 mm²
Terminal7-pole
Max. conductor cross section2,5 mm²
Degree of protectionIP20/IP40
Protection classSK I
Test markCE, ENEC, VDE
NormEN 60598
Dimensions, Weight
System units15x SE
Length4485mm
Width58mm
Height43mm
Mounting distancemax. 3.5m
Weight6.0kg
Electrical connection
Connectionterminal, 7-pole, max. 2.5mm²
Through-wiring7x 2.5mm²
Key data
Product typetrunking components group (TS)
Product nameModario
Material, Colour
trunking railsheet steel, coated, pure white, 3-length
Mounting
Mounting method, mounting locationsuspended mounting, surface-mounted, to the ceiling
Arrangementsingle/continuous arrangement
Supplementonly suitable for use in indoor areas
Supplement
Protection ratingfor IP20/IP40 protection rating
Insulation classinsulation class I (protective earthing)
StandardEN 60598
Certification, designationCE, ENEC, VDE
The SITECO support rail Modario, type 5TR10370Q, is a component for mounting lights and electrical devices in distribution enclosures or on support rail systems. It is made of sheet steel and is coated in a light white finish. The rail is designed with a 3-long construction, enabling stable fixation of multiple components. With a total length of 4,485 mm, a width of 58 mm, and a height of 43 mm, it fits standard distribution enclosures and is designed for use in electrical installations.

Applications
The support rail is intended for use in electrical distribution systems, particularly in enclosures, where it serves as a mounting base for lights, switches, sockets, or other electrical components. The construction allows for secure and orderly fixation of devices, with the 3-long design ensuring even load distribution. The rail is suitable for indoor use, as it is designed for protection class IP20/IP40, which provides protection against contact with fingers and splashing water from above at angles up to 60°.

Functions and Equipment in Detail
The rail features an integrated wiring system with 7x 2.5 mm², enabling efficient cabling. The terminal is 7-pole and supports a maximum conductor cross-section of 2.5 mm². This allows for a secure and reliable electrical connection between mounted devices and the power supply network. Protection class SK I (protective earthing) ensures the rail is connected to a protective conductor, enabling safe dissipation of fault currents in the event of a fault.

Technology Explained Simply
The use of sheet steel as material ensures high mechanical stability and durability. The coated surface in light white provides a clean visual appearance and protects the material from corrosion. The 3-long construction offers multiple mounting points, allowing several devices to be mounted in parallel. The integrated 7-pole terminal with max. 2.5 mm² enables direct and secure wiring without additional connection components. Protection class IP20/IP40 is suitable for use in dry indoor environments where there is no direct water exposure or contact with moving parts.

Compatibility and Accessories
The support rail is designed for mounting lights and electrical components that are installed on support rail systems. It is compatible with other components of the Modario system and can be used in combination with corresponding lights, switches, or sockets. It complies with standard EN 60598, which applies to luminaires and luminaire systems, legitimizing its use in lighting installations.

Mounting and Installation
Mounting is done by securing the rail to a suitable carrier or within the enclosure, where the 3-long construction allows for secure anchoring. The integrated terminal is connected directly to the cables, ensuring the maximum allowable cross-section of 2.5 mm² is not exceeded. Protection class SK I requires proper connection to the protective conductor to ensure safety.

Operational Advantages
The support rail provides a stable mounting base, enabling secure and orderly installation of electrical components. The integrated wiring reduces the number of required connections and improves the reliability of the system. Compliance with standard EN 60598 and certification marks CE, ENEC, and VDE guarantee adherence to applicable safety and quality standards. Protection class IP20/IP40 ensures safe operation in indoor environments against mechanical damage and limited water exposure.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/300547
qrcode für SITECO 5TR10370Q mounting rail 4485x58x43 mm