SITECO 53BD812CV6C5D2, EAN: 4069025124340

SITECO 53BD812CV6C5D2 light module LED 12.660 lm

SITECO 53BD812CV6C5D2 light module LED 12.660 lm

Lieske Part No. 843464
Mfg Part No 53BD812CV6C5D2
EAN-Code 4069025124340
Manufacturer SITECO
Here only 307,61 EUR
366,06 EUR incl. VAT

Further information for SITECO 53BD812CV6C5D2 light module LED 12.660 lm

General
Materialsteel sheet, band lacquered, white
System dimension307 mm
Colour of light865
SDCM3 SDCM (initial)
BallastON/OFF Multilumen, CLOi, with plug, 3-pole, with phase selection
Mains supply220..240 V, AC, 50/60Hz
Start of service life69 W
End of life82 W
Light outletdirectly radiating
Light characteristicSymmetric
Degree of protection (overall)IP20
Degree of protection (LED chamber)IP50
Protection class (overall)SK I (protective earthing)
Test markCE, ENEC, VDE, UKCA
Impact strengthIK03
Permissible ambient temperature-35..+35 °C
Interchangeabilitylight source and operating device interchangeable
Primary optical coverPMMA
Through wiringtapable in system dimension
IFS complianceYes
Ecodesign Regulation (EU) 2019/2020Yes
Certificates, Standards
Protection ratingIP20
Protection rating (lamp compartment)IP50
Insulation classinsulation class I (protective earthing)
Impact resistanceIK03
Temperature range (operation)-35..+35°C
Supplementcorresponds to IFS (International Featured Standards) requirements for safety and quality in the food industry, reducing of maximum allowable ambient temperature of 5°C with ceiling mounting
Certification, designationCE, ENEC, VDE, UKCA
Dimensions, Weight
System units5x SE
Length1535mm
Width81mm
Height90mm
Weight1.8kg
Electrical connection
Connectionplug, 3-pole, with phase selection
Nominal voltage220..240V, 50/60Hz, AC
Key data
Product typeluminaire insert
Product nameDUS 31
Lamps
Lampswith LED
Rated luminous flux12660lm
Luminous efficacy185lm/W
Colour temperature6500K
Colour rendering indexCRI > 80
Light colour865
SDCM (Standard Deviation of Colour Matching)MacAdam ≤ 3 SDCM (initial)
Rated input power begin service life69
Rated input power end service life82
Lighting technology
Covercover, prismatic structure, frosted
Beam anglewide distribution
Symmetrysymmetric
Light emissiondirect distribution
UGR viewing direction along longitudinal luminaire axis≤ 28
UGR viewing direction along lateral luminaire axis≤ 28
Material, Colour
PS LED insertsheet steel, coil coated, white, 5x system unit, for tool-free mounting of luminaire in DUS mounting rail
Mounting
Arrangementsingle/continuous arrangement
Operating device
ControlON/OFF Multilumen, CLOi
Service life
Rated service life70000h (L100) at AT = 25°C, 70000h (L100) at AT = ta max
The DUS 31 luminaire insert from SITECO, type 53BD812CV6C5D2, is a modular lighting element designed for use in industrial and commercial indoor spaces. It is designed as a luminaire insert to be integrated into existing system lights, particularly in systems with a system dimension of 307 mm. The construction from band-lacquered steel sheet in white ensures a robust and visually uniform design. Dimensions are 1,535 mm length, 81 mm width, and 90 mm height, corresponding to an arrangement of five system dimensions. The primary optical cover consists of PMMA, a transparent plastic known for its high light transmittance and mechanical stability. Light emission occurs directly radiating, resulting in a symmetrical light distribution and enabling even illumination of the space.

Applications
This luminaire insert is intended for indoor use, particularly in areas that must comply with IFS (International Featured Standards) requirements for safety and quality in the food industry. This makes it suitable for production halls, kitchens, storage, and packaging areas in food processing. The permissible ambient temperature ranges from -35 °C to +35 °C. For ceiling mounting, a reduction of the maximum ambient temperature by 5 °C is required to ensure operational safety.

Functions and Equipment in Detail
The light source is based on LED technology and produces a rated luminous flux of 12,660 lumens. The colour temperature is 865, corresponding to neutral white to cool white lighting. Colour consistency is ensured by an SDCM (Standard Deviation of Colour Matching) of 3 SDCM (initial), indicating high colour stability and minimal colour deviation. The ballast is an ON/OFF Multilumen, CLOi, with integrated plug, 3-pole, and phase selection, enabling flexible installation. The wiring is accessible at system dimension intervals, facilitating integration into existing electrical systems.

Technology Explained Simply
The LED light source is designed in accordance with the Ecodesign Regulation (EU) 2019/2020, making both the light source and the ballast replaceable. This increases the overall system lifespan and reduces maintenance effort. The operating voltage is 220 to 240 V, AC, at a frequency of 50/60 Hz. Electrical power consumption varies over the life cycle from 69 W at the beginning to 82 W at the end of life. The protection rating (overall) is IP20, providing protection against finger contact and against solid foreign objects larger than 12.5 mm. The LED compartment is protected to IP50, meaning dust-protected and resistant to limited splashing water. The protection class is SK I, requiring protective earthing. The impact resistance is IK03, providing protection against heavy mechanical impacts such as blows or shocks from small objects.

Compatibility and Accessories
The luminaire insert is designed for systems with a system dimension of 307 mm and can be integrated into existing luminaire constructions. Compatibility with other components of the DUS system is ensured, especially when they share the same system dimension and plug connection. The ballasts are specifically designed for LED technology and ensure stable power supply.

Installation and Mounting
Mounting is done by inserting into a suitable luminaire housing, with wiring accessible at system dimension intervals. Electrical connection is made via a 3-pole plug with phase selection, allowing flexible adaptation to existing installations. Protective earthing is required, as the protection class SK I is specified.

Operational Advantages
The combination of high luminous efficacy, low energy consumption, and long service life makes the luminaire insert an economical solution for indoor lighting. The replaceability of the light source and ballast in accordance with the Ecodesign Regulation reduces maintenance effort and disposal costs. Compliance with IFS standards ensures suitability for sensitive areas in the food industry. The robust construction with IP20 and IK03 protection ensures reliable performance under industrial conditions.

The certification marks CE, ENEC, VDE, and UKCA confirm compliance with applicable European and British safety and quality standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/843464
qrcode für SITECO 53BD812CV6C5D2 light module LED 12.660 lm