| Certificates, Standards |
| Protection rating | IP64 |
| Insulation class | insulation class I (protective earthing) |
| Impact resistance | IK06 |
| Protection symbol | D if used in an environment with conductive dust loads with corresponding accessories |
| Temperature range (operation) | -35..+40°C |
| Certification, designation | CE, ENEC, VDE, UKCA |
| Dimensions, Weight |
| Length | 1500mm |
| Width | 90mm |
| Height | 101mm |
| Weight | 2.9kg |
| Electrical connection |
| Connection | plug, 3-pole, with phase selection |
| Nominal voltage | 220..240V, 50/60Hz, AC |
| Key data |
| Product type | luminaire insert |
| Product name | Licross 11 Protected MO |
| Lamps |
| Lamps | with LED |
| Rated luminous flux | 8190lm |
| Luminous efficacy | 167lm/W |
| Colour temperature | 5000K |
| Colour rendering index | CRI > 80 |
| Light colour | 850 |
| SDCM (Standard Deviation of Colour Matching) | MacAdam ≤ 3 SDCM (initial) |
| Rated input power begin service life | 49 |
| Rated input power end service life | 54 |
| Supplement | internal wiring halogen-free |
| Lighting technology |
| Cover | cover |
| Beam angle | wide distribution |
| Symmetry | symmetric |
| Light emission | direct distribution |
| Material, Colour |
| Licross LED insert | sheet steel, galvanised, coil coated, white |
| Mounting |
| Mounting method, mounting location | slip-in mounting, in the Licross trunking rail |
| Arrangement | single/continuous arrangement |
| Operating device |
| Control gear | ECG Multilumen |
| Control | ON/OFF Multilumen, CLOi |
| Service life |
| Rated service life | 70000h (L100/B50) at AT = ta max |
Licross 11 Protected MO, luminaire insert, made of sheet steel, galvanized, coil-coated, white, length: 1,500mm, width: 90mm, height: 101mm, LED rated luminous flux: 8,190lm, light color: 850, ballast: ON/OFF Multilumen, CLOi, ballast: EVG-Multilumen, with plug, 3-pin, with phase selection, mains connection: 220..240V, AC, 50/60Hz, start of service life: 49W, end of service life: 54W, wiring halogen-free, primary lighting technology. Cover: cover, made of PMMA, light emission: direct beam, primary light characteristic: symmetrical, protection type (total): IP64, protection class (total): SK I (protective earthing), test mark: CE, ENEC, VDE, UKCA, protection mark: D when used in an environment with conductive dust load with appropriate accessories, impact resistance: IK06, permissible ambient temperature for indoor areas: -35..+40°C, when mounted on the ceiling, the permissible maximum ambient temperature is reduced by 5°C, complies with the requirements of IFS (International Featured Standards) for safety and quality in the food industry, LABS conformity tested in accordance with VDMA 24364:2018-05