Further information for SITECO 51TP117N485G lamp insert LED 8.680 lm 840
General
Colour of light
840
SDCM (initial)
2
Ballast
ON/OFF
Connector
3-pole
Mains supply
220..240 V
Frequency
50/60 Hz
Rated power
49 W
Internal wiring
halogen-free
Primary light guidance
plastic lens
Primary optical cover
cover made of PMMA
Light outlet
directly radiating
Primary light characteristic
Symmetric
Degree of protection (overall)
IP64
Protection class (overall)
SK I (protective earthing)
Test mark
CE, ENEC, VDE, UKCA
Protection symbol
D when used in an environment with conductive dust loading with appropriate accessories
Impact strength
IK06
Permissible ambient temperature for indoor use
-25..+35 °C
LABS compliance
tested according to VDMA 24364:2018-05
Eco-design regulation
(EU) 2019/2020
Interchangeability
light source and control gear are interchangeable
Phase selection
IFS compliance
Certificates, Standards
Protection rating
IP64
Insulation class
insulation class I (protective earthing)
Impact resistance
IK06
Protection symbol
D if used in an environment with conductive dust loads with corresponding accessories
Temperature range (operation)
-25..+35°C
Certification, designation
CE, ENEC, VDE, UKCA
Dimensions, Weight
Length
1500mm
Width
90mm
Height
101mm
Weight
2.4kg
Electrical connection
Connection
plug, 3-pole, with phase selection
Nominal voltage
220..240V, 50/60Hz, AC
Key data
Product type
luminaire insert
Product name
Licross 11 Protected MO
Lamps
Lamps
with LED
Rated luminous flux
8680lm
Luminous efficacy
179lm/W
Colour temperature
4000K
Colour rendering index
CRI > 80
Light colour
840
SDCM (Standard Deviation of Colour Matching)
MacAdam ≤ 2 SDCM (initial)
Rated input power
49W
Supplement
internal wiring halogen-free
Lighting technology
Light control
lens of plastic
Cover
cover
Beam angle
narrow distribution
Symmetry
symmetric
Light emission
direct distribution
UGR viewing direction along longitudinal luminaire axis
≤ 19
UGR viewing direction along lateral luminaire axis
≤ 19
Material, Colour
Licross LED insert
sheet steel, galvanised, coil coated, white
Mounting
Mounting method, mounting location
slip-in mounting, in the Licross trunking rail
Arrangement
single/continuous arrangement
Operating device
Control
ON/OFF
Service life
Rated service life
100000h (L95) at AT = 25°C, 100000h (L90) at AT = ta max
The Licross 11 Protected MO from SITECO is a luminaire insert for industrial and commercial applications, particularly in environments with increased requirements for safety and hygiene. The device is made of sheet steel, galvanised and coil-coated, with a white surface finish. With a length of 1,500 mm, a width of 90 mm and a height of 101 mm, it offers a compact yet powerful design. It is designed for indoor use, with an ambient temperature range of -25 °C to +35 °C. When installed on the ceiling, a reduction of the maximum ambient temperature by 5 °C is required.
Applications
This luminaire insert is particularly suitable for production halls, warehouses, packaging areas and other areas of the food industry, as it meets the requirements of IFS (International Featured Standards) for safety and quality. The construction is suitable for environments with conductive dust contamination, provided appropriate accessories are used. The protection rating IP64 ensures protection against dust and splashing water, making it suitable for wet or dusty work areas. The impact resistance IK06 provides additional mechanical protection against minor impact loads.
Functions and Equipment in Detail
The device features an LED light source with a nominal luminous flux of 8,680 lumens and a light colour of 840 (cool white). The initial colour temperature deviation is 2 SDCM (Standard Deviation of Colour Matching), ensuring high colour consistency. Primary light control is achieved via a plastic lens, combined with a PMMA cover, which creates a direct, radiant light output. The light characteristic is symmetrical, enabling even illumination of the work area. The internal wiring is halogen-free, increasing environmental compatibility.
Technology Explained Simply
The luminaire insert is operated via a ballast with ON/OFF function. It features a 3-pole plug with phase selection, enabling flexible installation. The supply voltage is 220 to 240 V AC at 50/60 Hz. The nominal power is 49 W. The light source and ballast are replaceable in accordance with the Ecodesign Regulation (EU) 2019/2020, improving maintenance and sustainability of the product. LABS conformity has been verified in accordance with VDMA 24364:2018-05, confirming compliance with quality standards in industrial lighting.
Compatibility and Accessories
The luminaire insert is designed for use in systems with appropriate accessories, particularly in environments with conductive dust contamination. The protection symbols D and the protection rating IP64 require the use of suitable mounting and protective components for such applications. The protection class SK I (protective earthing) requires proper earthing of the device.
Mounting and Installation
The use of the 3-pole plug with phase selection enables flexible and safe electrical connection. Protective earthing must be ensured in accordance with the requirements of protection class SK I.
Operational Advantages
The luminaire insert offers high luminous efficacy with low energy consumption, reducing operating costs. The replaceability of the light source and ballast in accordance with Ecodesign standards simplifies maintenance and reduces replacement and disposal effort. Conformity with IFS and VDMA 24364:2018-05 ensures quality and safety in industrial use. The robust construction from galvanised sheet steel and the protection rating IP64 ensure long service life even in demanding environments.
The specifications for protection rating, impact resistance and ambient temperature are crucial for selecting the appropriate luminaire insert for the intended application. The light colour 840 and the high luminous flux of 8,680 lumens ensure clear and sufficiently bright illumination in production and warehouse areas.