| General |
| Colour of light | 840 |
| SDCM (initial) | 2 |
| Ballast | ON/OFF Multilumen |
| Mains supply | 220..240 V |
| Frequency | 50/60 Hz |
| Rated power | 87 W |
| Internal wiring | halogen-free |
| Primary optical cover | cover made of PMMA |
| Light outlet | directly radiating |
| Primary light characteristic | Symmetric |
| Degree of protection (overall) | IP54 |
| Protection class (overall) | SK I (protective earthing) |
| Test mark | CE, ENEC, VDE, UKCA |
| Protection symbol | D when used in an environment with non-conductive dust loading with appropriate accessories |
| Impact strength | IK06 |
| Permissible ambient temperature for indoor use | -35..+35 °C |
| Requirements | complies with requirements of IFS (International Featured Standards) for safety and quality in the food industry |
| LABS compliance | tested according to VDMA 24364:2018-05 |
| Eco-design regulation | compliant with (EU) 2019/2020 |
| Interchangeability | light source and control gear are interchangeable |
| Certificates, Standards |
| Protection rating | IP54 |
| Insulation class | insulation class I (protective earthing) |
| Impact resistance | IK06 |
| Protection symbol | D if used in an environment with non-conductive dust loads with corresponding accessories |
| Temperature range (operation) | -35..+35°C |
| Certification, designation | CE, ENEC, VDE, UKCA |
| Dimensions, Weight |
| Length | 1500mm |
| Width | 90mm |
| Height | 101mm |
| Weight | 2.4kg |
| Electrical connection |
| Connection | plug, 3-pole, with phase selection |
| Nominal voltage | 220..240V, 50/60Hz, AC |
| Key data |
| Product type | luminaire insert |
| Product name | Licross 11 Protected HO |
| Lamps |
| Lamps | with LED |
| Rated luminous flux | 15020lm |
| Luminous efficacy | 172lm/W |
| Colour temperature | 4000K |
| Colour rendering index | CRI > 80 |
| Light colour | 840 |
| SDCM (Standard Deviation of Colour Matching) | MacAdam ≤ 2 SDCM (initial) |
| Rated input power | 87W |
| Supplement | internal wiring halogen-free |
| Lighting technology |
| Cover | cover |
| Beam angle | wide distribution |
| Symmetry | symmetric |
| Light emission | direct distribution |
| UGR viewing direction along longitudinal luminaire axis | ≤ 28 |
| UGR viewing direction along lateral luminaire axis | ≤ 28 |
| Material, Colour |
| Licross LED insert | sheet steel, galvanised, coil coated, white |
| Mounting |
| Mounting method, mounting location | slip-in mounting, in the Licross trunking rail |
| Arrangement | single/continuous arrangement |
| Operating device |
| Control | ON/OFF Multilumen |
| Service life |
| Rated service life | 100000h (L95) at AT = 25°C, 100000h (L90) at AT = ta max |
The Licross 11 Protected HO from SITECO is a luminaire insert for industrial and commercial applications, particularly in areas with high hygiene requirements. The device is made of sheet steel, galvanised and belt-lacquered in white, with a length of 1,500 mm, a width of 90 mm, and a height of 101 mm. It is designed for indoor use and offers high light output with a rated luminous flux of 15,020 lumens at a light colour of 840 (cool white). The initial colour temperature deviation is 2 SDCM (Standard Deviation of Colour Matching), ensuring high colour consistency.
Applications
This luminaire insert is particularly suitable for production halls, warehouse halls, cold stores, and other areas of the food industry, as it meets the requirements of IFS (International Featured Standards) for safety and quality. The construction is designed to be used in environments with non-conductive dust contamination, provided appropriate accessories are used. When mounted on the ceiling, a reduction of the maximum permissible ambient temperature by 5 °C is required.
Functions and Equipment in Detail
The device is equipped with an ON/OFF multilumen ballast, connected via a 3-pole plug with phase selection. The supply voltage is 220 to 240 V AC at a frequency of 50/60 Hz. The rated power is 87 watts. The internal wiring is halogen-free, increasing environmental compatibility. The primary optical cover is made of PMMA and enables direct, symmetrical light emission.
Technology Explained Simply
The protection rating IP54 ensures protection against dust and splashing water, enabling use in humid or dusty environments. Protection class SK I requires protective earthing to prevent electrical hazards. The impact resistance IK06 protects the device against mechanical impacts, such as those occurring during light mechanical contact in operation. The permissible ambient temperature for indoor use ranges from -35 °C to +35 °C.
Compatibility and Accessories
The luminaire insert complies with the Ecodesign Regulation (EU) 2019/2020, and both the light source and the ballast are replaceable. LABS conformity has been verified according to VDMA 24364:2018-05, highlighting its suitability for use in the food industry. The device carries the certification marks CE, ENEC, VDE, and UKCA, confirming compliance with European and British safety standards.
Mounting and Installation
Mounting is typically done on the ceiling or on a wall; when mounted on the ceiling, the temperature limit must be reduced by 5 °C. Connection is made via the integrated 3-pole plug with phase selection, enabling flexible installation. Protective earthing is mandatory.
Operational Advantages
The Licross 11 Protected HO offers high light output with low energy consumption, resulting in an efficient lighting solution. The robust construction from galvanised sheet steel and high impact resistance ensure a long service life. Compliance with IFS standards makes the device particularly suitable for the food industry. The replaceability of the light source and ballast in accordance with the Ecodesign Regulation simplifies maintenance and reduces disposal costs.