Siglent's SPD3303X programmable linear DC power supply features a 10,9 cm ( 4,3 inch ) TFT LCD display, supports remote programming and has real-time signal display. Features 3 independently controlled and isolated outputs: Two 32V/3 ,2A, one 2.5V/3.3V/5V/3.2A × 1, total 220W 5-digit voltage/4-digit current display, minimum resolution: 1mV/1mA (SPD3303X) The Timing function provides programmed output steps 4.3 inch true color TFT LCD display with 480 x 272 resolution 3 types of output modes: independent, serial (max. 60V) and parallel (max. 6.4A) 100/120/220/230V compatible design to meet the needs of different power systems Intelligent temperature-controlled fan effectively reduces fan noise Clear graphical user interface with waveform display function Five internal groups for storing/retrieving system parameters support data storage space expansion Free PC software Easypower. Also supports remote programming and includes a LabView driver Specifications Model Comparison
SPD3303X
SPD3303X-E
SPD3303C Channel Output CH1: Voltage 0 to 32V,
Current 0 to 3.2A
CH2: Voltage 0 to 32V,
Current 0 to 3.2A
CH3 : Voltage 2.5/3.3/5.0V,
Current 3.2A CH1: Voltage 0 to 32V,
Current 0 to 3.2A
CH2: Voltage 0 to 32V,
Current 0 to 3.2A
CH3: Voltage 2.5/3.3/5.0V, Current 3.2A CH1: Voltage 0 to 32V
Current 0 to 3.2A
CH2: Voltage 0 to 32V
Current 0 to 3.2A
CH3 : Voltage 2.5/3.3/5.0V
Current 3.2A Display 10,9 cm ( 4,3 inch ) color TFT LCD 5 digit voltage display
4 digit current display 10,9 cm ( 4,3 inch ) color TFT LCD 5 digit voltage display
4-digit current display LED display:
4-digit voltage display,
3-digit current display Resolution 1mV,
1mA 10 mV,
10 mA 10 mV,
10 mA Settings Voltage ± (0.03% of reading + 10 mV)
Current ± (0. 3% of reading + 10 mA) Voltage: ± (0.5% of reading + 2 digits)
Current ± (0.5% of reading + 2 digits) Voltage:
± (0.5% of reading + 3 digits)
current :
± (0.5% of reading + 3 digits) Readback accuracy Voltage ± (0.03% of reading + 10 mV)
Current ± (0.3% of reading + 10 mA) Voltage: ± (0.5% of reading + 2 digits)
Current: ± (0.5% of measured value + 2 digits) Voltage:
± (0.5% of measured value + 3 digits)
Current:
± (0.5% of reading + 3 digits)