SICAM Q100, multifunctional power quality recorder, PQI-A, dimensions 96mm x 96mm x 100mm, panel-mounted device with LCD, supply voltage: DC 24 - 250 V, AC 110 - 230 V, 4 inputs for alternating voltage measurements, 4 inputs for alternating current measurements, 2 binary inputs, 2 binary outputs, web server for parameterization and visualization, NTP time synchronization, CE and UL certification, 2 GB memory, Ethernet switch, Ethernet interface, RJ45, and communication protocols Modbus TCP and IEC 61850 Server Serial interface, RS485, Modbus RTU Gateway/Master The multifunction measuring device SICAM Q100 is used for the acquisition, visualization, analysis and transmission of electrical measured variables, such as alternating current, alternating voltage, frequency, power, harmonics, etc. The recording, processing and accuracy of the measured variables and events is carried out in accordance with the IEC 61000-4-30 Class A standard for measuring power quality. The measured variables are transmitted to a PC or control center via communication interfaces or shown on the display. In addition to the monitoring function, the SICAM Q100 multifunctional device offers a combined recording and analysis function: Measured values can be recorded by various recorders (e.g. power quality and fault recorders) at parameterizable intervals. Long-term data and events are evaluated directly in the device and presented as a report in accordance with power quality standards (e.g. EN 50160).