| General |
| Cable type | IE Connecting Cable |
| Plug connection | IE FC RJ45 Plug-180 |
| Cable construction | pre-fabricated |
| Transmission rate | 10/100/1000/10000 Mbit/s |
| Degree of protection | IP20/30 |
| Cable category | Cat6a |
| Wiring standard | ISO/IEC 11801, EN 50173 |
| Shielding | Double shielded |
| Earthing concept | continuous |
| Tension relief | Integrated |
| Material | silicone-free |
| Application | drag chains, moving machine parts |
The product 6XV1878-5BH20 from Siemens is a pre-assembled industrial Ethernet connection cable, specifically designed for use in industrial networks with RJ45 interfaces. It is intended for connecting Industrial Ethernet participants operating in protection class IP20 or IP30, and supports data transfer rates of 10, 100, 1000, and 10000 Mbit/s. The cable is designed for use in drag chains, for example, with continuously moving machine parts, and is therefore particularly suitable for applications with dynamic motion, such as in the automotive industry, especially in paint shops, where the silicone-free design is required.
Applications
The cable is designed for industrial environments where high mechanical load capacity and electrical interference resistance are required. It is used in installations where moving machine parts require a continuous connection via drag chains. The silicone-free design makes it suitable for applications in the automotive industry, where silicone contamination could impair paint quality. Use in protection class IP20/30 allows deployment in enclosed enclosures or environments with limited protection against contact and splashing water.
Functions and Equipment in Detail
The cable is pre-assembled with two IE FC RJ45 Plug-180 connectors, enabling quick and error-free installation. The AWG22 connection conductors ensure a reliable electrical connection. The integrated strain relief protects the connector from mechanical stress caused by movement or vibration. The shielding contact is reliably implemented to ensure stable signal transmission.
Technology Explained Simply
The cable complies with Category 6 (Cat6a) according to international cabling standards ISO/IEC 11801 and EN 50173. This category guarantees high bandwidth and minimal signal interference, which is necessary for real-time transmission of large data volumes. The double-shielded cable and continuous grounding concept ensure an interference-resistant network connection that remains stable even in electromagnetically demanding environments. The length is 2.0 meters, which is sufficient for many industrial applications without requiring additional extensions.
Compatibility and Accessories
The cable is compatible with Industrial Ethernet participants featuring RJ45 interfaces. It can be used in conjunction with other products from the Siemens SIMATIC NET system, for example, with Power Connecting cables such as 6XV1801-5DN10 or 6XV1801-5DH50, which supply power to ET 200 systems. Other suitable products include Industrial Ethernet installation loops such as 6XV1871-2L (PROFINET Type C) or 6XV1870-2F (PROFINET Type C), which are suitable for similar application scenarios.
Installation and Mounting
The pre-assembled design of the cable enables time-saving and error-free installation. The integrated strain relief and reliable shielding contact reduce the risk of connection errors or signal interference. Installation is performed by simply plugging the RJ45 connectors into the corresponding ports of the Industrial Ethernet participants. No additional tools or mounting aids are required, as the connection is mechanically stable and electrically secure.
Operational Advantages
The cable provides a reliable and interference-resistant network connection that remains stable even under dynamic conditions. The pre-assembled design reduces installation time and minimizes error sources. The silicone-free design meets specific requirements in the automotive industry. The combination of double-shielded cable and continuous grounding concept ensures high signal quality, which is critical for the operation of automation systems. The length of 2.0 meters is optimal for many industrial applications, eliminating the need for additional extensions.