| General |
| Degree of protection | IP65/67 - |
| Transmission rate | 10/100 Mbit/s |
| Cable type | Double shielded - |
| Plug connection | M12 (D-coded) / IE FC RJ45 - |
| Material | silicone-free - |
| Earthing concept | continuous - |
| Tension relief | Integrated - |
| Wiring standard | ISO/IEC 11801, EN 50173 - |
| Category | Cat5e - |
The product 6XV1871-5TN15 from Siemens is a pre-assembled Industrial Ethernet connection cable, specifically designed for use in moving machine parts such as drag chains. It connects Industrial Ethernet participants with RJ45 interface and provides reliable data transmission at rates of 10/100 Mbit/s. The cable is equipped with an M12 connector (D-coded) at one end and an IE FC RJ45 connector at the other end, making it ideal for use in industrial environments requiring high mechanical stress and environmental conditions.
Applications
This cable is intended for use in drag chains, for example, in continuously moving machine parts in the manufacturing industry. It is particularly suitable for applications in the automotive industry, especially in paint shops, as it is silicone-free and thus has no negative impact on painting processes. The protection rating IP65/67 also makes it suitable for outdoor use or in humid and dusty environments.
Functions and Equipment in Detail
The cable is pre-assembled with AWG22 connection conductors, enabling time-saving and error-free connection of end devices. The integrated strain relief and reliable shielding contact ensure a stable connection, even under mechanical stress. The double-shielded cable and continuous earthing concept increase the network's immunity to interference and prevent signal disturbances.
Technology Explained Simply
The cable exceeds the requirements of Category 5 (Cat5e) according to international cabling standards ISO/IEC 11801 and EN 50173. The use of M12 connectors (D-coded) ensures a mechanically robust and weather-resistant connection designed for industrial applications. The RJ45 connector at the other end allows direct connection to standard Industrial Ethernet devices. The length is 15.0 meters, providing sufficient reach for many industrial applications.
Compatibility and Accessories
The cable is compatible with Industrial Ethernet systems using RJ45 interfaces. It can be combined with various accessories, such as the IE RJ45 Port Loc key (6GK1901-1BB50-0AA0), M12 Panel Feedthrough-Pro enclosure cable entries (6GK1901-0DM30-2AA5), or M12 adapters (e.g. 6GK1901-0DE21-6AA0), to optimize installation in enclosures or on machines. Using these accessories enables structured and secure cabling.
Installation and Mounting
Installation is done by simply plugging the M12 and RJ45 connectors into the corresponding ports. The pre-assembled design reduces installation time and minimizes error sources. The integrated strain relief protects the cable from mechanical stress, especially in moving applications. Shielding contact and earthing concept must be observed during installation to ensure interference immunity.
Operational Advantages
The cable offers high reliability and stability in dynamic environments. The pre-assembled design reduces installation time and error susceptibility. The silicone-free design protects sensitive processes such as painting. Compliance with standards ISO/IEC 11801 and EN 50173, as well as protection rating IP65/67, guarantees high quality and suitability for demanding industrial applications.
Protection Rating
The protection rating IP65/67 means the cable is dust-tight and protected against water jets and temporary immersion. This makes it suitable for outdoor use and in humid or dusty environments.
Data Transfer Rate
The data transfer rates of 10/100 Mbit/s enable efficient data transmission for typical Industrial Ethernet applications.
Cable Type
The cable is double-shielded and meets the requirements of Category 5e (Cat5e) according to ISO/IEC 11801 and EN 50173, exceeding these standards.
Length
The total cable length is 15.0 meters, which is sufficient for many industrial applications.
Connector Type
One end features an M12 connector (D-coded), while the other end has an IE FC RJ45 connector designed for connection to standard Industrial Ethernet devices.
Material
The cable is silicone-free, making it suitable for use in the automotive industry, especially in paint shops.
Earthing Concept
A continuous earthing concept ensures a stable and interference-immune connection, minimizing signal disturbances.
Strain Relief
The integrated strain relief protects the cable from mechanical stress, especially in moving applications such as drag chains.
Cabling Standard
The cable complies with international cabling standards ISO/IEC 11801 and EN 50173 and exceeds the requirements of Category 5 (Cat5e).