Siemens 6XV18703QH20, EAN: 4019169404938

Siemens 6XV1870-3QH20 Ethernet Cable 2m RJ45

Industrial Material > Automation > Industrial bus systems

Siemens 6XV1870-3QH20 Ethernet Cable 2m RJ45

Lieske Part No. 401996
Mfg Part No 6XV18703QH20
EAN-Code 4019169404938
Manufacturer Siemens
Here only 28,21 EUR
33,57 EUR incl. VAT

Further information for Siemens 6XV1870-3QH20 Ethernet Cable 2m RJ45

General
Cable typeCAT6A
ShieldingS/FTP
Number of cores4x2
Connector typeRJ45
Data transfer rate10/100/1000 Mbit/s
Materialsilicone-free
Colour markingcrossed: red, not crossed: green
System compatibilitySIMATIC NET Industrial Ethernet FastConnect
The Siemens 6XV1870-3QH20 is an Industrial Ethernet TP cord with RJ45/RJ45 connectors, pre-assembled in a length of 2 metres. It is a patch cable for connecting end devices with RJ45 interfaces to the interference-resistant Industrial Ethernet FastConnect cabling system, which supports data transfer rates of 10/100/1000 Mbit/s. The cable is specifically designed for use in industrial environments where high interference immunity and reliability are required.

Applications
This product is intended for use in automation technology, particularly in environments with high requirements for electrical stability and mechanical durability. Due to its silicone-free design, it is suitable for use in the automotive industry, for example in paint shops, where silicone connections could cause damage. The cable is suitable for connecting network devices, controls, sensors, and other end devices in industrial network environments.

Functions and Equipment in Detail
The patch cable is designed as a CAT6A S/FTP cable, ensuring high data transfer performance and interference protection quality. The construction with 4x2 conductors enables reliable signal transmission even under demanding industrial conditions. The cable is pre-assembled and fitted with two RJ45 connectors, which have been factory-tested to enable quick and error-free commissioning. The colour marking of the RJ45 connectors distinguishes between crossed (red on both sides) and non-crossed (green on both sides) connections, simplifying installation and preventing incorrect connections.

Technology Explained Simply
The designation CAT6A describes the category of network cable designed for high bandwidth and low signal interference. S/FTP stands for Screened/Foiled Twisted Pair, meaning that individual conductor pairs are shielded with a metallic screen to minimise electromagnetic interference. The cable is therefore suitable for use in environments with high electromagnetic interference levels. The pre-assembled design with pre-mounted connectors reduces installation time and minimises error sources during installation.

Compatibility and Accessories
The product is part of the SIMATIC NET system and compatible with the Industrial Ethernet FastConnect cabling system. It can be combined with various accessories, such as the Modular Outlet 6GK1901-1BE00-0AA2, the IE RJ45 Port Loc Key 6GK1901-1BB50-0AA0, or the VPE1 Cu/FO Modular Outlet Module Carrier 6GK1901-1BE00-0AA4. These components enable structured and modular cabling in enclosures and industrial installations. Other compatible products include SIMATIC NET 6GK1901-1BE00-0AA0, 6GK1901-1FC00-0AA0, or 6GK1901-0BE10-0AA0, which are also used for cabling in the Industrial Ethernet system.

Installation and Mounting
Installation is carried out by simply inserting the RJ45 connectors into the corresponding ports of the end devices or network. The small cable diameter facilitates routing, especially in confined enclosure spaces. The colour-coded connectors support correct cabling, reducing the likelihood of incorrect connections. Factory testing of the cable ensures high quality and reliability from the outset.

Operational Advantages
The cable offers high reliability and interference immunity, which is crucial for industrial use. The pre-assembled design reduces installation time and minimises error susceptibility. The silicone-free design protects sensitive surfaces in the automotive industry. The colour marking of the connectors simplifies identification of connection types, making maintenance and troubleshooting easier. Compatibility with the SIMATIC NET system enables an integrated and structured network architecture in industrial installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/401996
qrcode für Siemens 6XV1870-3QH20 Ethernet Cable 2m RJ45