| General |
| Manufacturer | Siemens |
| Product type | Line reactor |
| Voltage range | 380-480 V |
| Frequency range | 47-63 Hz |
| Nominal load current | 4,0 A |
| Construction size | FSC |
| Compatibility | SINAMICS G120, PM240-2, SINAMICS G120C |
| Operation mode | stand-alone |
The Siemens SINAMICS line reactor, type 6SL3203-0CE13-2AA0, is a stand-alone electrical component for current smoothing in the connection area of frequency converters. It is specifically designed for use with the Power Module PM240-2 (in standard and Push-Through variants) of the modular frequency converter SINAMICS G120, as well as with the compact converter SINAMICS G120C. The reactor serves to reduce harmonic components in the line current, which are generated by the pulse-width-modulated current draw of the converters. By smoothing the current, the thermal stress on the power components in the rectifier and the intermediate circuit capacitors is reduced, thereby increasing the overall lifespan of the converter. At the same time, line disturbances are minimized, improving power quality and supporting compliance with harmonic and current distortion standards.
Applications
The line reactor is intended for industrial applications in the field of drive technology, particularly in systems operating with the SINAMICS G120 modular system. It is used to improve current quality in the supply network and reduce stress on electrical components within the converter. The reactor is designed for three-phase AC networks and is operated in installations with a rated voltage of 380 to 480 V and a frequency of 47 to 63 Hz. The FSC size enables compact integration into existing system configurations.
Functions and Equipment in Detail
The reactor operates as a passive electrical component connected in series with the converter’s line connection. It reduces high-frequency components in the line current, which arise from the rapid switching operations within the converter. The rated load current is 4.0 A, defining the maximum current draw at which the reactor operates safely and reliably in continuous operation. Current smoothing leads to reduced thermal stress on internal converter components, particularly the rectifier diode and intermediate circuit capacitors. This contributes to extending the converter’s lifespan and reducing maintenance intervals.
Technology Explained Simply
The line reactor consists of a coil body, typically made from a ferromagnetic core material to increase inductance. The coil is dimensioned to provide the required inductance at the specified frequency and voltage, effectively damping current harmonics. The reactor acts as an impedance for high frequencies while allowing the fundamental current (50/60 Hz) to pass almost unimpeded. This improves the current waveform in the network, which is particularly important when supplying multiple converters from a single network to ensure network stability.
Compatibility and Accessories
The reactor is specifically developed for use with the Power Module PM240-2 of the SINAMICS G120 system, including the Push-Through variant. It is also compatible with the compact converter SINAMICS G120C. The FSC size enables direct mounting onto the corresponding converter modules.
Mounting and Installation
The line reactor is mounted in series between the power supply and the converter. Installation is carried out according to the technical specifications of the respective converter and local electrical installation safety regulations. The reactor is designed for industrial environments and requires no special mounting aids. The connection terminals are designed for connection to standard power cables.
Operational Advantages
By reducing current harmonics, power quality is improved, which is particularly beneficial in installations with multiple converters. The thermal relief of internal converter components leads to a longer lifespan and higher operational reliability. The reactor contributes to compliance with harmonic and current distortion standards, which is required in many industrial facilities. The stand-alone design enables flexible integration into existing systems without requiring additional modifications to the converter.
Protection Rating and Operating Conditions
The reactor is designed for use in industrial environments and meets the requirements for electrical components in drive technology. The FSC size is designed for compact mounting, adapting to the dimensions of the associated converter modules.