Siemens 6SL32030BE235HA0, EAN: 4025515681816

Siemens 6SL3203-0BE23-5HA0 EMC filter 35A

Industrial Material > Engines and accessories

Siemens 6SL3203-0BE23-5HA0 EMC filter 35A

Lieske Part No. 671330
Mfg Part No 6SL32030BE235HA0
EAN-Code 4025515681816
Manufacturer Siemens
Here only 304,07 EUR
361,84 EUR incl. VAT

Further information for Siemens 6SL3203-0BE23-5HA0 EMC filter 35A

General
ManufacturerSiemens
Nominal current35 A
Operating voltage3AC 400 V
Immunity classC2, C3
Frame sizeFSA - FSC
Cable length C225 m
Cable length C350 m
Total cable length with intermediate circuit coupling C2100 m
Total cable length with intermediate circuit coupling C3250 m
Intermediate circuit couplingYes
The Siemens SINAMICS S210 EMC filter type 6SL3203-0BE23-5HA0 is a specially developed line filter for use with servo inverters of the SINAMICS S210 series. It serves to suppress electromagnetic disturbances in the drive system and ensures compliance with EMC requirements according to IEC 61800-3. The device is designed for an operating voltage of 3AC 400 V and has a rated current of 35 A. It is compatible with frame sizes FSA to FSC and is used as accessories for drive technology to improve interference immunity and electromagnetic compatibility in industrial applications.

Applications
The EMC filter is used in industrial drive systems where high electromagnetic compatibility is required. It is particularly suitable for installations where multiple drives are connected via long cables, and where compliance with interference immunity categories C2 and C3 according to IEC 61800-3 is required. Filtering takes place directly at the inverter input to minimize disturbances in the network and avoid interference with adjacent electrical devices.

Functions and equipment in detail
The filter enables achievement of category C2 for cable lengths up to 25 m and category C3 for cable lengths up to 50 m. When used with a DC link coupling, the total cable length can be extended to up to 100 m for category C2 and up to 250 m for category C3. These functions are crucial for planning drive systems in larger production facilities, where cables between inverter and motor often run over long distances. Filtering is achieved using passive components that suppress interference voltages in the frequency range without affecting the drive's performance.

Technology explained simply
The EMC filter operates as a passive component connected in series with the inverter's power supply. It reduces high-frequency disturbances generated by switching operations in the inverter and prevents them from being fed back into the power supply network. Categories C2 and C3 refer to interference immunity requirements according to IEC 61800-3, with C2 indicating lower interference requirements and C3 indicating higher requirements. Filtering is achieved using inductive and capacitive elements specifically designed for use with 3AC 400 V and 35 A.

Compatibility and accessories
The filter is specifically developed for servo inverters of the SINAMICS S210 series and is offered as accessories for these drives. It is intended for frame sizes FSA to FSC and can be installed directly on the inverter. Use with DC link coupling extends the possible cable length, increasing flexibility in system planning.

Installation and mounting
Installation takes place directly at the input of the SINAMICS S210 inverter. It is important to ensure correct polarity and connections according to electrical standards. Filtering occurs in the power supply connection area, and the cable connection between filter and inverter should be kept as short as possible to maximize effectiveness. Mounting typically takes place in the enclosure or near the inverter, depending on the system configuration.

Advantages in operation
Using the EMC filter improves the electromagnetic compatibility of the drive system and reduces the risk of interference with other electrical devices. This leads to stable operation, especially in environments with many electrical devices. Compliance with IEC 61800-3 standards enables approval in various industrial environments and reduces the risk of operational disruptions caused by electromagnetic interference. Filtering occurs without additional energy consumption, as it is a passive component.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/671330
qrcode für Siemens 6SL3203-0BE23-5HA0 EMC filter 35A