| General |
| Operating voltage | 200-240 V |
| Nominal current | 18 A |
| Category | C2 |
| Norm | EN 610083 |
The Siemens SINAMICS V90/S210 Line Filter, type 6SL3203-0BB21-8VA1, is a line filter for industrial drive systems, specifically designed for use with the SINAMICS V90 and S210 series frequency converters. It serves to reduce electrical disturbances in the power supply network and enables compliance with the electromagnetic compatibility (EMC) requirements of category C2 according to standard EN 610083. This filter is designed for single-phase AC installations and is used in applications where high electromagnetic compatibility (EMC) is required, for example in manufacturing automation or machine tool applications.
Applications
The Line Filter is used in industrial environments where SINAMICS V90 or S210 series frequency converters are operated. It is particularly required when the installation must meet the EMC requirements of category C2 according to EN 610083. This applies to applications where electromagnetic emissions into the power supply network must be limited to avoid interfering with other devices connected to the network. Typical application scenarios include machine controls, conveyor systems, machine tools, or packaging machines, where the frequency converters are directly connected to the power supply network.
Functions and Equipment in Detail
The filter reduces high-frequency disturbances generated by the switching operations of the frequency converters, ensuring that electromagnetic emissions in the network remain within the limits specified for category C2. It is designed for an operating voltage of 200 to 240 volts AC and can handle a rated current of 18 amperes. Category C2 is a specific EMC class defined in standard EN 610083, intended for installations with low electromagnetic emissions. The filter is designed as an additional system component and is used in combination with the specified frequency converters.
Technology Explained Simply
The Line Filter operates using passive components such as inductors and capacitors, arranged in a specific circuit configuration to attenuate disturbances in the frequency range above the mains frequency. The attenuation is achieved through the impedance of the inductors and the capacitance of the capacitors, which together create a filtering effect. This prevents disturbances generated by the fast switching operations of the frequency converters from entering the power supply network. The filter technology is designed to provide the necessary attenuation for category C2 without impairing the performance of the drive system.
Compatibility and Accessories
The filter is specifically developed for the SINAMICS V90 and S210 series frequency converters. It is used in combination with these devices to meet the EMC requirements of category C2. The use of the filter is part of the system configuration recommended by Siemens to ensure the electromagnetic compatibility of the installation. There are no additional specific accessories associated with this filter.
Mounting and Installation
The filter is installed in the power supply line between the mains and the frequency converter. Mounting is typically carried out inside the enclosure or near the drive, with electrical connections made in accordance with standard regulations and safety requirements. The physical dimensions of the filter are 62 mm (width) × 155 mm (height) × 53 mm (depth), allowing it to be installed in standard enclosures. Installation does not require any special tools or additional components.
Advantages in Operation
Using the Line Filter enables compliance with EMC standards, particularly category C2 according to EN 610083, which is required for the approval of installations in many industrial sectors. This minimizes electromagnetic emissions, increasing the reliability of the entire system and reducing the risk of interference with other devices connected to the network. The filter is robustly constructed and designed for industrial environments, ensuring a long service life and minimal maintenance. Integration into existing systems with SINAMICS V90 or S210 is straightforward and does not require modifications to the control or drive system.